UP Squared Troubleshooting and FAQs

Discussion List

• 
  How can I run an Up Squared (v1) off battery?

  Answered r0h 17 views 1 comment 0 points Most recent by r0h May 31
• 
  Unable to read/write GPIO pins

  John_Bale 138 views 1 comment 0 points Most recent by John_Bale April 4
• 
  Accidentally plugged in 12V UP4000 power supply. Is it fried?

  r0h 48 views 2 comments 0 points Most recent by Wilbert March 14
• 
  up squared shut down unexpectedly

  step_rbt 40 views 0 comments 0 points Started by step_rbt February 7
• 
  No Reboot - Must Unplug

  Answered TheZNerd 61 views 3 comments 0 points Most recent by Wilbert February 1
• 
  Bricked after BIOS update

  Answered Wayne Tabram 58 views 1 comment 0 points Most recent by FredyHsu January 13
• 
  FYI for SATA cable for UP Squared

  skorpioskorpio 2 views 0 comments 0 points Started by skorpioskorpio December 2022
• 
  Bricked after BIOS update?

  Answered LemmingOverlord 87 views 3 comments 0 points Most recent by Wilbert December 2022
• 
  I2C Limited Functionality - Windows/Linux .NET 6/NET Framework/nodeJS

  TheZNerd 3 views 0 comments 0 points Started by TheZNerd October 2022
• 
  No BIOS display on HDMI

  ericlaw 62 views 1 comment 0 points Most recent by camillus June 2022
• 
  About UP Squared boards display interface, Win10 license, battery

  sresthag 21 views 0 comments 0 points Started by sresthag April 2022
• 
  Not able to boot into clonezilla

  Answered sasuke 96 views 1 comment 0 points Most recent by sasuke March 2022
• 
  TOBSUN 50W DC-DC Converter Boot Loop

  Answered ✓ TheZNerd 36 views 1 comment 0 points Most recent by TheZNerd February 2022
• 
  Constant Reboots

  MarkyMark 355 views 26 comments 0 points Most recent by plattner January 2022
• 
  2 simultaneous LAN connections

  Answered issaramaji 5 views 1 comment 0 points Most recent by DCleri December 2021
• 
  Native Win32/Win64 SDK C++ samples missing SPI demo

  g2as 71 views 2 comments 0 points Most recent by g2as October 2021
• 
  How to resolve the Graphics problem?

  mopplayer 12 views 0 comments 0 points Started by mopplayer October 2021
• 
  Can a GPIO Pin (HAT) change from input to output (or reverse) in Linux (Ubuntu)?

  Answered Closed nhattan 131 views 1 comment 0 points Most recent by camillus September 2021
• 
  Low Ethernet Speeds

  txDood 31 views 2 comments 0 points Most recent by rogertsai(AAEON) July 2021
• 
  UART Port IO or MMIO addressing

  GMN 1K views 3 comments 0 points Most recent by GMN June 2021
• 
  I2C on UP2 doesn't work as expected. Fails if using more than one sensor.

  MeneT3k3l 208 views 6 comments 0 points Most recent by niharG June 2021
• 
  Upsquared robomaker twist to ackermann drive conversion causes robot collision with obstacles

  spoluri 32 views 2 comments 0 points Most recent by spoluri May 2021
• 
  UPsquared Robomaker motion is jerky

  spoluri 22 views 2 comments 0 points Most recent by spoluri May 2021
• 
  UART issue on the UP squared board

  kkannan7 207 views 2 comments 0 points Most recent by kkannan7 May 2021
• 
  Double Edge TPU Usage

  gianluca_corvitac 111 views 2 comments 0 points Most recent by rogertsai(AAEON) May 2021
• 
  How to get stable behavior for Up2 with Win10 or Ubuntu?

  Answered orli 72 views 4 comments 0 points Most recent by DCleri April 2021
• 
  OTG USB gadget not detected

  samh 826 views 9 comments 1 point Most recent by DCleri February 2021
• 
  working Up2 board stopped working - no more blue light

  KahrenA 63 views 2 comments 0 points Most recent by mschoenebeck January 2021
• 
  UpSquare: bluetooth covering range issue using QCA6175

  Stephanie 74 views 4 comments 1 point Most recent by CedricM January 2021
• 
  Up2 low temperature issues

  jakob 71 views 3 comments 0 points Most recent by rogertsai(AAEON) January 2021
• 
  UP Squared + NetPlus

  Answered ✓ semih 57 views 2 comments 0 points Most recent by semih January 2021
• 
  Up Squared booting with random behavior.

  vrgdubey 85 views 10 comments 0 points Most recent by vrgdubey December 2020
• 
  Why fail Hi-Safe? Can I restore it?

  Answered robe07 122 views 6 comments 0 points Most recent by garyw November 2020
• 
  Tensorflow building configuration

  matnito 44 views 0 comments 0 points Started by matnito October 2020
• 
  3.5" HDD not getting power

  Bjartskular 3 views 1 comment 0 points Most recent by DCleri September 2020
• 
  Unable to read data from rx & tx, plus permissions issue.

  AdamMiltonBarker 218 views 12 comments 0 points Most recent by DCleri August 2020
• 
  UP2 default ACPI and ACPICA

  Question Closed GMN 11 views 1 comment 0 points Most recent by GMN August 2020
• 
  Not detecting WiFi adapter

  nedo99 52 views 3 comments 0 points Most recent by vrgdubey August 2020
• 
  Where to plug S.USV UP PicoBlade cables on UP square ?

  Question Closed jessicaC 21 views 0 comments 0 points Started by jessicaC July 2020
• 
  [SOLVED]Booting yocto image on UP squared

  baxbony 197 views 4 comments 0 points Most recent by niharG July 2020
• 
  Unable to boot to newly installed Linux OS

  jconway 32 views 1 comment 0 points Most recent by DCleri June 2020
• 
  No power, No LED lights

  harishk 46 views 3 comments 0 points Most recent by DCleri June 2020
• 
  UP Squared with Ubuntu RPi.GPIO not working

  Answered ✓ DJac 274 views 4 comments 0 points Most recent by DJac June 2020
• 
  Help needed: GPIO and Ubuntu 18 Problem

  gmenvielle 40 views 0 comments 0 points Started by gmenvielle May 2020
• 
  Help

  efan 13 views 6 comments 0 points Most recent by DCleri May 2020
• 
  About the wireless connection to upsuqared

  Answered PUlab 63 views 1 comment 0 points Most recent by rogertsai(AAEON) May 2020
• 
  UP Squared & Intel System Debugger (NDA 2019).

  JonS 195 views 3 comments 0 points Most recent by danm April 2020
• 
  EMMC unreliable

  guettli 102 views 0 comments 0 points Started by guettli April 2020
• 
  Unable to install Ubuntu?

  rtwheato 91 views 3 comments 0 points Most recent by gvy April 2020
• 
  UP square stability issues

  Per Mejdal Rasmussen 106 views 2 comments 0 points Most recent by Per Mejdal Rasmussen April 2020
• 
  UP Square burnt, how to repair?

  fantuan 31 views 2 comments 0 points Most recent by fantuan April 2020
• 
  Oh NO!!!! 24v 5.5mm plugged in to up squared

  Eric 104 views 7 comments 0 points Most recent by fantuan April 2020
• 
  Stability issues, some specific code on the EMMC? Whiping EMMC helped

  gvy 23 views 2 comments 0 points Most recent by gvy April 2020
• 
  Using OpenVINO with GPU on UP Squared reboot the system

  dhoa 176 views 19 comments 0 points Most recent by dhoa April 2020
• 
  UP Squared Won't Boot (Only Blue Led) - Removed power during boot

  jorgemia 271 views 1 comment 0 points Most recent by DCleri March 2020
• 
  Up^2 Edge Computer: problem with LoRa on a 10 meters distance

  vpodolskiy 156 views 12 comments 0 points Most recent by DCleri March 2020
• 
  [SOLVED]RAM Test Algorithm

  invis 32 views 1 comment 0 points Most recent by rogertsai(AAEON) February 2020
• 
  UP Sqared with Win10 LTSC

  Ideas 43 views 1 comment 0 points Most recent by garyw February 2020
• 
  Up Squared not working require hardware diagrams for debug

  alesh 32 views 1 comment 0 points Most recent by DCleri February 2020
• 
  LPC bus degradation issue -- symptoms if I don't update BIOS?

  hungrycactus 41 views 0 comments 0 points Started by hungrycactus February 2020
• 
  Flashing blue light. Up2 board not booting

  Bas Horneman 673 views 7 comments 0 points Most recent by PeterD December 2019
• 
  Wont Boot or Post - Very Hot

  jlathrop 32 views 1 comment 0 points Most recent by Aling December 2019
• 
  Up^2 with fan, Pentium N4200 crashing/rebooting Win10 with heavy graphics use

  Answered stykujason 137 views 7 comments 0 points Most recent by DCleri December 2019
• 
  Up Squared board and UPS and wide range DC-in HAT

  claytong 76 views 4 comments 0 points Most recent by olmatic December 2019
• 
  up2 boots straight to BIOS

  fishb 250 views 5 comments 0 points Most recent by DCleri December 2019
• 
  up2board: bios doesn't detect HDD connected to sata

  Mondo 31 views 1 comment 0 points Most recent by DCleri December 2019
• 
  Cannot boot UP2 board. Missing harddrive?

  eas 22 views 1 comment 0 points Most recent by DCleri November 2019
• 
  Will the Up Squared work for my application? PCI 9052 IO Bus

  korber710 31 views 1 comment 0 points Most recent by DCleri November 2019
• 
  Upboard suddenly stopped booting up, blue LED still lights up.

  andySF 133 views 2 comments 0 points Most recent by DCleri October 2019
• 
  Moved: M.2 WiFi card disapearing??

  Closed DCleri 1 view 0 comments 0 points Started by DCleri October 2019
• 
  Issues booting from eMMC

  thomasm 342 views 2 comments 0 points Most recent by johndoe October 2019
• 
  Cannot boot UP2 board. Missing harddrive?

  eas 227 views 3 comments 0 points Most recent by DCleri October 2019
• 
  cannot find the hard disk

  ASM2019 298 views 9 comments 0 points Most recent by lazna July 2019
• 
  Booting OS using the serial console : It freezes

  salr 55 views 4 comments 0 points Most recent by salr June 2019
• 
  We had two up squared which cannot power on. Can you suggest the solution?

  maggie 33 views 0 comments 0 points Started by maggie June 2019
• 
  Up2 Board doesn't boot, no LED lights up, no screen

  ahbong123 183 views 2 comments 0 points Most recent by littleluigi April 2019
• 
  Mysterious ANSI codes prevent booting

  Jeroen van Jaarsveld 71 views 6 comments 0 points Most recent by Jeroen van Jaarsveld March 2019
• 
  UP2 very fragile on the supply voltage

  Vincent Talon 83 views 1 comment 0 points Most recent by nukular March 2019
• 
  GNU Grub prompt cannot get my UP squared to boot

  MICHAEL A POPE 64 views 0 comments 0 points Started by MICHAEL A POPE February 2019
• 
  An UP2 not booting at all; what could be wrong?

  mvandervoort 113 views 2 comments 0 points Most recent by mvandervoort November 2018
• 
  UP Squared not booting up, only solid blue led

  suryender 183 views 4 comments 0 points Most recent by DCleri November 2018
• 
  Up Squared Cannot bootup again after shutdown

  junxiongcn 61 views 1 comment 0 points Most recent by suryender November 2018
• 
  UP Squared BIOS is gone

  Cz3103 340 views 2 comments 0 points Most recent by gezax October 2018
• 
  [Solved] Ubuntu Install Errors with: the 'grub-efi-amd64-signed' package failed ..

  dgclq 507 views 4 comments 0 points Most recent by eduncan911 October 2018
• 
  The board randomly reboot in Windows using chrome.

  Dark 50 views 4 comments 0 points Most recent by eduncan911 October 2018
• 
  UP2 not powering on.

  JRamirez 1.2K views 43 comments 0 points Most recent by JtagHJ August 2018
• 
  [SOLVED] Got my UP 2 board today. But can't boot any thing on it.

  Raymond Day 1.4K views 7 comments 0 points Most recent by monteroluiyi August 2018
• 
  How can I delete the ubuntu on my up board??

  Answered Chris66 117 views 2 comments 0 points Most recent by Chris66 July 2018
• 
  How can i boot on PXE ?

  Answered toto2dev 186 views 1 comment 0 points Most recent by Twilimark June 2018
• 
  Boot issue

  kloczek 52 views 0 comments 0 points Started by kloczek June 2018
• 
  UP Squared does not allow me to install an OS on it

  Mihai2402 489 views 4 comments 0 points Most recent by Mihai2402 June 2018
• 
  No HDMI or DP output, solid blue LED

  Kevin 81 views 2 comments 1 point Most recent by DCleri May 2018
• 
  Up Squared Does not power up

  rhulme77 42 views 0 comments 0 points Started by rhulme77 April 2018
• 
  Up Squared Board Does Not Boot, No LED Lights Up

  Answered yktan6 424 views 4 comments 0 points Most recent by Oliver Korff April 2018
• 
  BIOS does not show EMMC in boot options

  hifiboy 243 views 0 comments 0 points Started by hifiboy March 2018
• 
  Black screen after BIOS update

  Answered ✓ Alphakilo 163 views 1 comment 0 points Most recent by rogertsai(AAEON) March 2018
• 
  up2 won't start up anymore

  Bas Horneman 96 views 9 comments 0 points Most recent by Bas Horneman March 2018
• 
  Unable to boot up anymore

  Dark 41 views 1 comment 0 points Most recent by Bas Horneman March 2018
• 
  Flashing blue light. UP2 not booting up anymore.

  Bas Horneman 11 views 0 comments 0 points Started by Bas Horneman February 2018
• 
  eMMC disappears at lower temperatures

  Radek Vrzal 148 views 2 comments 0 points Most recent by Radek Vrzal February 2018