Bricked after BIOS update?

LemmingOverlord
LemmingOverlord New Member Posts: 10 ✭
in UP Squared Troubleshooting and FAQs

I recently updated the BIOS on the UP Squared to the 6.1 BIOS (from https://downloads.up-community.org/). I then followed the guidance in https://github.com/up-board/up-community/wiki/Firmware

Everything went fine and the update was a success (although I ran "reset" from the EFI Shell to reboot the device, as it didn't automatically reboot).

Now the device doesn't boot and all I get is a flashing blue power light, next to the DC jack.

· Share on FacebookShare on Twitter

Answers

  • Wilbert
    Wilbert New Member Posts: 168 ✭✭✭

    Hi LemmingOverlord,

    Please confirm when the blue light is on, connect the keyboard, does the Numlock light respond?
    If not, unfortunately, you will need to send it in for aftermarket repairs to fix the problem.
    It seems that the BIOS update failed, and the BIOS cannot be entered due to the current situation.
    Do you still have the BIOS version before the update?

    Best Regard.

    · Share on FacebookShare on Twitter
  • rzur
    rzur New Member Posts: 1 ✭
    edited December 2022

    I've just upgraded my board from 5.2 version to 6.1, and my board completely do not start up. No LED is lighting.

    · Share on FacebookShare on Twitter
  • Wilbert
    Wilbert New Member Posts: 168 ✭✭✭

    Hi Sir,

    Unfortunately, it looks like updating the BIOS failed.
    Please send this motherboard through customer service personnel for repair.

    · Share on FacebookShare on Twitter

Categories