Carrier board connector

rubynerd · January 2018

Hi, when will carrier boards go on sale? & what connector do I need to mount on a carrier board? Is it AXK5S00047YG? Unfortunately I can't find a place to buy 10 or so of those connectors, as Mouser/DigiKey only sell them per 1500 on a reel, which is a few too many for my use case. Thanks!

Troy Lin · January 2018

Hi Rubynerd,

The board to board connector is Panasonic. AXK6S00647YG
The UP-core is male connector, you will need a matching female connector with the same part number.

rubynerd · January 2018

Hi - which pitch? https://www.panasonic-electric-works.com/pew/eu/downloads/ds_p5k_p5ks_en.pdf shows multiple pitches with the same part number you've provided.

Troy Lin · January 2018

Hi Rubynerd,

The pitch is 0.5 mm

rubynerd · January 2018

Sorry, I meant mated height - the pitch is always 0.5mm.

Additionally, do you know if the other mated heights are cross-compatible with the connector on the UP Core?

Troy Lin · January 2018

Hi rubynerd,

We are using 5.3mm height on the UP core, as long as it is Panasonic. AXK6S00647YG, the mating height can be compatible.

rubynerd · February 2018

Amazing - it's basically impossible to get these connectors without buying a reel, but someone on eBay apparently has some, so I'll get some of those and see how I go with them

jkhearsc · February 2018

Digi-Key P/N: 255-4198-1-ND

Carrier board connector

Comments

Categories