Community migration in progress. Please bear with us as we work through the migration.

Carrier board connector

rubynerdrubynerd Posts: 4New Member

Hi, when will carrier boards go on sale? & what connector do I need to mount on a carrier board? Is it AXK5S00047YG? Unfortunately I can't find a place to buy 10 or so of those connectors, as Mouser/DigiKey only sell them per 1500 on a reel, which is a few too many for my use case. Thanks!

Comments

  • Troy LinTroy Lin Posts: 27AAEON mod

    Hi Rubynerd,

    The board to board connector is Panasonic. AXK6S00647YG
    The UP-core is male connector, you will need a matching female connector with the same part number.

  • rubynerdrubynerd Posts: 4New Member

    Hi - which pitch? https://www.panasonic-electric-works.com/pew/eu/downloads/ds_p5k_p5ks_en.pdf shows multiple pitches with the same part number you've provided.

  • Troy LinTroy Lin Posts: 27AAEON mod

    Hi Rubynerd,

    The pitch is 0.5 mm

  • rubynerdrubynerd Posts: 4New Member
    edited January 29

    Sorry, I meant mated height - the pitch is always 0.5mm.

    Additionally, do you know if the other mated heights are cross-compatible with the connector on the UP Core?

  • Troy LinTroy Lin Posts: 27AAEON mod

    Hi rubynerd,

    We are using 5.3mm height on the UP core, as long as it is Panasonic. AXK6S00647YG, the mating height can be compatible.

  • rubynerdrubynerd Posts: 4New Member

    Amazing - it's basically impossible to get these connectors without buying a reel, but someone on eBay apparently has some, so I'll get some of those and see how I go with them

  • jkhearscjkhearsc Posts: 3New Member

    Digi-Key P/N: 255-4198-1-ND

Sign In or Register to comment.