Boot problem

Good day!

We work in cooperation with the VIT company to manufacture industrial "Outdoor Box" PCs used for the running neural networks near the data source. As a basis, we use an UP board and during operation, we faced a problem that the device stops turning on after a certain number of shutdowns to restore power. To turn on, you need to manually press the Power button. Actually the device is in the “half on” state, the power indicator is on, but there is no power on the USB, and the board does not boot. This is a big problem for us, because the device must be dismantled and disassembled to access this button.

Marking on board:
UP-CHT01
1907UP6402
Rev:A0.3 0 0

BIOS version: 2.17.1249

Comments