No screen activity upon power-up
I purchase an UP board as a part of the Robotics Development Kit (SKU:953143) from Intel Click store (Order# CLK00226215) on 08/15/2017. I only had only one opportunity to power on the board, and it has been sitting in my hobby box ever since. I did not install the operating system to date. Finally, I got over the inertia and tried to install Ubilinux. When I powered the board, I could not see anything on the HDMI screen. The fan and blue LED seem to turn on.
Has my board gone bad? I am surprised that the board can go bad even without doing anything. My Raspberry Pi and Beaglebone have gone through a similar treatment, but they seem to work just fine. Is there a way to revive the board, or is fit for a paperweight now?
I noticed that this board has a BIOS/CMOS battery unlike my Pi/Bealgebone - is there a likely hood that the board will not boot if the battery is dead? I thought a dead battery should atleast show me the UP splash screen on boot until POST.
I know its late, but is there a way I can request an RMA from AAEON(ASUS) or INTEL? Since I bought this from Intel Click store, I am totally confused about what to do! Feels like 230$ down the drain
Any help, inputs or suggestions to revive the board will be helpful.
- 275 All Categories
- 104 Announcements & News
- 40 Product News - New Product/Product Change Notice/ End-of-life
- 176 Welcome Developers!
- 49 Unboxing & Project Sharing
- 16 Tech Updates
- 288 UP Products
- 1 UP Xtreme i11
- UP Squared 6000
- 30 UP Squared Pro
- 115 UP Xtreme
- 774 UP Squared
- 1.4K UP Board
- 83 UP Core Plus
- 211 UP Core
- 3 UP Xtreme Lite
- 39 UP AI Edge
- 207 Starter Kits & Peripheral