This is the area to clarify hardware specification if there's anything unclear from the datasheet. If the specification is software related, please ask in the related software section.

GPIO interrupt causes kernel panic

scint
scint New Member Posts: 2 ✭
in UP Board Hardware Specification

Hi, I've found that I can't configure any of the GPIO pins to handle interrupt requests. The following is an example which fails when trying to set Linux GPIO 5 as an IRQ pin:

$ echo 5 > /sys/class/gpio/export
$ cat /sys/class/gpio/gpio5/value
1
$ cat /sys/class/gpio/gpio5/direction
in
$ echo rising > /sys/class/gpio/gpio5/edge
kernel panic

Specs:
Hardware: UP-CHT01
OS: Ubuntu 16.04.5 LTS
Kernel: 4.15.0-37-generic
BIOS: UPC1DM15

Thanks.

Tagged:
· Share on TwitterShare on Facebook

Comments

Tagged

Categories