This is the area to clarify hardware specification if there's anything unclear from the datasheet. If the specification is software related, please ask in the related software section.
USB 2.0 port compatible connector??
curious_engineer
New Member Posts: 1 ✭
Hi. I need to use 2 USB 2.0 port and UART0 of Upsquared board. But i didn't find any compatible connector on Digikey and farnell?? if i dont find any compatible connector . i will dissasemble connector and solder the wire instead of connector
(there are compatible cable on Up Shop but shipping time long for me)
manufacturer:CATCH manufacturer part number : 1204-700-10RM
ftp://data.aaeon.com.tw/DOWNLOAD/testreport/ULVENDOR/COM-BYTC2-A10-0001.pdf
Comments
The USB2 port connector looks like it is compatible with the JST SH series.
Available from RS components:
Connector: https://uk.rs-online.com/web/p/crimp-terminal-covers/3116552
Pre-crimped wires: https://uk.rs-online.com/web/p/pcb-connector-contacts/3116675
Gaz
Hi,
As I'm not in the USA I'm trying to find a cheaper alternative to buying Up's USB cable. This cable would work wouldn't it?
https://www.delock.com/produkte/S_84833/merkmale.html
Not sure if I'd have to file off the lip but no big deal.
Fidelity,
the Delock cable seems to have a connector with 1.25mm pitch. If true, this would not work with the board (which requires 1mm pitch connector).
By any means, buy pre-crimped wires with JST SH connector. I was stupid enough to buy connectors and wire that I had to crimp myself (BIG mistake).