Package C-States, Render standby
Moritz
New Member Posts: 2 ✭
Is there any specific reason that CPU C-State and Package C-State is limited to C1 by default in BIOS? In addition, the Render Standby (RC6) of the GPU has been turned off?
This would gain me the other 2-3 Watts I was looking for at the beginning.
This would gain me the other 2-3 Watts I was looking for at the beginning.
Comments
-
Hi moe,
The intention is to workaround a hardware bug in the SoC that may cause the processor to hang when switching back from deep sleep states.
See erratum CHT45 in this document: http://www.intel.com/content/www/us/en/processors/atom/atom-z8000-spec-update.html
This BIOS setting can be overridden by the operating system, in any case. On Linux, for example, the intel_idle module will not honor this setting unless the intel_idle.max_cstate kernel parameter is set to 0.
Regards -
I would like to add that we are looking to include the CHT45 fix in the next UEFI BIOS release.
-
Thanks for clarifying this! Looking forward for the fix, but so far i'm not running into any trouble.
Regards
moe
Categories
- All Categories
- 63 Announcements & News
- 58 Product News - New Product/Product Change Notice/ End-of-life
- 99 Welcome Developers!
- 46 Unboxing & Project Sharing
- 114 Tech Updates
- 3.4K UP Products
- 14 UP 7000
- 1 UP Squared i12
- 12 UP Xtreme i12
- 13 UP Squared Pro 7000
- 1 UP Element i12 Edge
- 23 UP Squared V2
- 63 UP 4000
- 23 UP Xtreme i11
- 34 UP Squared 6000
- 57 UP Squared Pro
- 135 UP Xtreme
- 820 UP Squared
- 1.4K UP Board
- 74 UP Core Plus
- 217 UP Core
- 3 UP Xtreme Lite
- 40 UP AI Edge
- 265 Starter Kits & Peripheral