Up Squared on Linux - getting mmc error messages

Andy Carlson
Andy Carlson New Member Posts: 6
I have an 8GB, 128GB N4200 Up Squared. I installed Fedora, with the 4.11 kernel. I have been getting a lot of timeout errors on the mmc. Here is an example:

[Sun Jun 11 21:26:31 2017] mmc0: Timeout waiting for hardware interrupt.
[Sun Jun 11 21:26:31 2017] sdhci: =========== REGISTER DUMP (mmc0)===========
[Sun Jun 11 21:26:31 2017] sdhci: Sys addr: 0x00000008 | Version: 0x00001002
[Sun Jun 11 21:26:31 2017] sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
[Sun Jun 11 21:26:31 2017] sdhci: Argument: 0x028a9988 | Trn mode: 0x0000003b
[Sun Jun 11 21:26:31 2017] sdhci: Present: 0x1fff0001 | Host ctl: 0x0000003d
[Sun Jun 11 21:26:31 2017] sdhci: Power: 0x0000000b | Blk gap: 0x00000080
[Sun Jun 11 21:26:31 2017] sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[Sun Jun 11 21:26:31 2017] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000
[Sun Jun 11 21:26:31 2017] sdhci: Int enab: 0x02ff000b | Sig enab: 0x02ff000b
[Sun Jun 11 21:26:31 2017] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[Sun Jun 11 21:26:31 2017] sdhci: Caps: 0x546ec881 | Caps_1: 0x80000807
[Sun Jun 11 21:26:31 2017] sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[Sun Jun 11 21:26:31 2017] sdhci: Host ctl2: 0x0000008d
[Sun Jun 11 21:26:31 2017] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x000000027034e200
[Sun Jun 11 21:26:31 2017] sdhci: ===========================================
[Sun Jun 11 21:26:31 2017] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0x400900
[Sun Jun 11 21:26:31 2017] mmcblk0: error -110 transferring data, sector 42637704, nr 8, cmd response 0x0, card status 0x0

Any ideas what is going on? Things hang for a few seconds when this happens. Thanks.

Comments