Rtc battery with cable replacement or plug connector part number please

cai · April 2020

Hi! I have a up2 without the rtc battery, I would like to buy a replacement or make one myself. The thing is the connector for the rtc battery is so small that I can't seem to find any molex pico blade plug compatible with it.

How could I order a replacement? Can anyone please help me with that? The part number for the plug will suffice if anything else can't be done.

Thanks a zillion

Aling · April 2020

@cai UP team purchase whole RTC battery with plus from the supplier. So we also don't have the manufacturer part number of the plug. You may contact shop@up-board.org, we can ship you the RTC with connector for free, but the shipping will be at your cost. Not sure if it is a cost effective idea.

cai · April 2020

Thank you so much for your reply and offer Aling, much appreciated :)

Before writing you guys I searched a lot but couldn't find anywhere the plug that's used on the Up2. I would happily pay for shipping as not having RTC is not an option.

How should I proceed Whit this?

THANKS A ZILLION!

bmasephol · September 2021

I'm in the same boat, getting a used UP Squared device with the CMOS batter removed. Can the details of the connector on the board be shared, like size/pitch? Is it a standard size used in a lot of laptops?

Something like this might work?

https://www.amazon.com/gp/product/B07C6YB6X4?pf_rd_r=FMK42193VSAZHYW2VGXZ&pf_rd_p=8fe9b1d0-f378-4356-8bb8-cada7525eadd&pd_rd_r=ce1392a7-b89f-48fc-a10e-b2dbc7360a8b&pd_rd_w=6Z23u&pd_rd_wg=E8vB1&ref_=pd_gw_unk

That has a 1.25mm pitch and looks like it may work.

camillus · September 2021

Hi @bmasephol ,

(TF)Lithium Battery CR2032h 3v 240mAH. w/cable 90mm DIP Battery power. BP-CR2032-M90-001

Best regards,

bmasephol · September 2021

@camillus - appreciate the response and the details. I'm having little luck finding a replacement with those details, I might just have to wait for the device to get here (shipping right now) and take some measurements on it and see what I can come up with.

Any chance you could post a close up picture of the connector on that battery you have pictures of above next to a ruler?

camillus · September 2021

Hi @bmasephol ,

Nealers · October 2022

The connector used for the RTC Battery cable on Up Board is Molex 1.25mm Pitch, PicoBlade Receptacle Crimp Housing, Single Row, Friction Lock, 2 Circuits, Natural. Part number 510210200

Rtc battery with cable replacement or plug connector part number please

Comments

Categories