-
Re: SPI Interface and programming
@MoA For the temprary solution, please refer to the attached documents for details BTW, All signal pins (spi/gpio/i2c/pwm..) are designed for 3.3v only, and I2C is supported in SDK (UpBridge)1 · -
Re: eMMC not recognized
@lunz If you cannot see the eMMC chip in BIOS (as picture below), the emmc is probably damaged beyond repair, unless eMMC replaced.1 · -
Re: How many miliseconds is needed not to shut down on UpSquared?
@yunus_acz Here is the information for your reference C392 is 22uF / 10V C393 is 0.1uF / 16V1 · -
Re: What are the maximum/minimum feeding voltage for UpSquared?
@yunus_acz We follow the standard power spec for 5% tolerance, so the operating voltage range is 4.75 ~ 5.25V.1 · -
Re: WDF Violation BSOD w/Windows 10 version 1803
Hi @jbaptiste, To 3 unknown devices, these devices are open for Linux OS use, not for Windows OS. So, it's normal as shown in your device manager, see pictures below You could refer to the following …1 ·