Best Of
-
Re: Hardware information (UARTs etc.)
Hi @bcran Intel has not yet completed the slim bootloader instructions for UPX-MTL. If there are updates, we will notify you immediately. Or you can refer to the link first. https://github.com/tianoc…1 · -
Re: Develop my own driver
Hi @tm496220 Please refer to upbustool in the link. https://github.com/aaeonaeu/win-demo-apps Best Regards, Harry Chiu1 · -
Re: Develop my own driver
Hi @tm496220 If ubuntu, please refer to the Pinctrl driver. https://github.com/up-division/pinctrl-upboard Best Regards, Harry Chiu1 · -
Re: iTCO watchdog in Ubuntu
~~iTCO is already enabled as you can see, but on Ubuntu we kept the standard wdat_wdt driver provided by the distrubution. ~~ ~~In order to use iTCO you would need to recompile the kernel with wdat_w…1 · -
Re: iTCO watchdog in Ubuntu
@DCleri I am also experiencing this with Ubuntu 20.04 LTS kernel. Can you offer some advice on how to get the watchdog to work? when I load the ITCO modules I also only the the above response and do …1 · -
📣 ️ Back to Office Promotion
We’re excited to announce our Back to Office promotion, running between 1st and 30th of September! During this period, you can enjoy great deals on some of our best products, including: * UP Squared …1 · -
Re: Device mode on USB Type-c connector ?
Hi @Rhenry @deanm1278 Please refer to the attachment. Only Linux supports this feature. If the BIOS version is too low, this function cannot be used and the BIOS needs to be updated. Best Regards, Ha…1 · -
Re: My SBC (up squared V2) is not starting up, how to troublshoot ?
Hi @shujat Please try the following methods: * Please check if the CN14 is properly connected. You can try unplugging and reconnecting it. * Please check if the RTC battery still has power. Use a mul…1 · -
Re: What up-board to use as firewall (as second life)
Hello @packelend :) A good option if you are thinking about using an old UP board as a firewall is the UP Board with Intel Atom x5 Z8350. For managing firewall activities, these models provide an exc…1 · -
Re: No power, No LED lights
if the power supply is working, and the board is not anymore (not even a blue led) then apply for RMA if you are within warranty period.1 ·
