-
Re: MTBF for UpBoard
@walsh_nicholas We use the Telcordia (Bellcore) standard for reliability prediction produces calculated MTBF is about 270,566 hours and 3695.960706 Failure Rate1 · -
Re: What are the maximum/minimum feeding voltage for UpSquared?
@mli Yes, it's the same. To be input on 5V HAT (Pin2, pin4), the maximum input current is 3A for 1pin, so I recommend that both the pins need to connect with 5v power supply. BTW, please note that, u…1 · -
Re: How to downgrade bios
@SchneiderEnt We did not make a version of 32b for UPC1D11, and I don't recommend you to downgrade bios to UPC1BM0X. If you can take risks in this case, you can edit the .nsh script file by Notepad, …1 · -
Re: No boot, just blue LED
Hi All, try the following ways to restart your UP 1. Push the power button, on the same side of the DC jack 2. Remove cmos battery to clear BIOS. Pull out the cable from CN1, and pull-in back after 1…1 · -
Re: Black screen after BIOS update
Hi Alphakilo, It seemed the BIOS broken by reflash failed or wrong BIOS on your UP. Try to clean the CMOS on your UP, it will reset your BIOS settings if the upgradeable BIOS is valid. However, what'…1 ·