Welcome Developers! — upcommunity

Your Budget Stay at Triloknath Starts with Shernath Bapu Ashram Room Booking

shernathbapu — Fri, 16 May 2025 21:04:06 +0000

Hey everyone,

If you're planning a spiritual trip to Girnar or Junagadh and looking for a peaceful yet affordable stay, I highly recommend Shernath Bapu Ashram Room Booking. It’s the perfect choice for travelers seeking both comfort and connection to divinity.

Located near the sacred Girnar Hills, Shernath Bapu of Triloknath Ashram Guru Gorakhnath offers a serene atmosphere rooted in spiritual tradition. The accommodations are clean, comfortable, and ideal for both solo travelers and families. Whether you’re on a pilgrimage or just want a quiet retreat, Shernath Bapu of Triloknath Ashram has everything you need.

I recently visited Shernath Bapu Ashram Junagadh, and the experience was incredible. The staff is kind and helpful, and the environment is truly peaceful. Plus, room booking is super easy and budget-friendly!

For reservations or inquiries, you can reach out via the Shernath Bapu Ashram Contact Number: +91-8130449798.

Feel free to ask me any questions about my stay — happy to help!

Best regards,
Shernath Bapu of Triloknath Ashram

Shernath Bapu Ashram Junagadh is Top Affordable Destination

shernathbapu — Fri, 16 May 2025 20:55:40 +0000

Hey everyone,

If you're searching for an affordable yet deeply spiritual retreat in India, I highly recommend checking out Shernath Bapu Ashram Junagadh. Nestled at the base of the sacred Girnar Hills, this ashram is a peaceful haven for those seeking spiritual growth, meditation, and tranquility.

Shernath Bapu of Triloknath Ashram Guru Gorakhnath guides the spiritual essence of this place, attracting devotees from across the country. The ashram is rooted in the Nath tradition and offers a calm, divine atmosphere for seekers from all walks of life.

The best part? It’s incredibly affordable! Through Shernath Bapu Ashram Room Booking, you can find clean, comfortable accommodations suited for individuals, families, and groups. Whether you're visiting for a short spiritual break or planning a longer stay, the facilities are designed to support your inner journey.

Need help or want to book your stay? Just reach out using the Shernath Bapu Ashram Contact Number. The team is friendly, helpful, and always ready to guide new visitors.

If you're ready for a meaningful spiritual experience without spending a fortune, Shernath Bapu of Triloknath Ashram is the place to be.

Best Regards,
Shernath Bapu of Triloknath Ashram

Affordable Spiritual Travel: Visiting Shernath Bapu of Triloknath Ashram

shernathbapu — Fri, 16 May 2025 20:32:52 +0000

Hey everyone,

If you're looking for a peaceful yet budget-friendly spiritual getaway in India, I highly recommend visiting Shernath Bapu of Triloknath Ashram. Nestled at the base of Girnar Hills in Junagadh, this ashram is a hidden gem for seekers of inner peace and spiritual wisdom.

Rooted in the Nath tradition and inspired by Guru Gorakhnath, Shernath Bapu of Triloknath Ashram Guru Gorakhnath offers a serene environment for meditation, spiritual practice, and connection with like-minded souls.

Whether you're traveling solo or with family, Shernath Bapu Ashram Junagadh has clean, comfortable rooms to suit your needs. Booking your stay is easy through the Shernath Bapu Ashram Room Booking service online, and the team is very helpful and responsive if you call them directly at the Shernath Bapu Ashram Contact Number.

I had a rejuvenating experience and can confidently say this place combines spiritual depth with affordability—making it a perfect destination for anyone on a spiritual path.

Best Regards,
Shernath Bapu of Triloknath Ashram

Shernath Bapu of Triloknath Ashram Guru Gorakhnath: A Budget-Friendly

shernathbapu — Fri, 16 May 2025 20:16:23 +0000

Hey everyone,

If you're looking for a peaceful, spiritual, and budget-friendly place to reconnect with your inner self, I highly recommend Shernath Bapu of Triloknath Ashram Guru Gorakhnath in Junagadh. This sacred ashram, deeply rooted in the teachings of Guru Gorakhnath, is the perfect retreat for those seeking meditation, tranquility, and spiritual growth.

Located at the foothills of Girnar, Shernath Bapu of Triloknath Ashram offers a serene environment away from the chaos of daily life. Whether you're a first-time visitor or a returning devotee, the energy of the place is truly transformative.

One of the best things is how accessible it is for everyone. With clean, comfortable rooms available through Shernath Bapu Ashram Room Booking, you don’t have to worry about accommodation. Plus, for any questions or support, the team is always helpful—just reach out using the Shernath Bapu Ashram Contact Number.

If you're planning a trip to Junagadh, don’t miss the chance to visit Shernath Bapu Ashram Junagadh. It’s a spiritual experience you’ll never forget.

Best Regards,
Shernath Bapu of Triloknath Ashram

custom suiting

custom_suiting — Fri, 18 Apr 2025 14:10:25 +0000

In the busy fashion hub of New York City, custom clothing stands out as a ideal for individuality and style. Maximus Custom Clothing as best Custom Clothing NYC offers a unique balance of perfect fit, personalized style, and bespoke tailoring. Whether you’re dressing for a business meeting, a wedding, or a special occasion, a custom suiting provides a look that’s uniquely yours.
Custom clothing has seen a significant rise in popularity across NYC. With the diverse fashion scene in New York, many individuals are turning to custom made suits to express their personal style. The use of bespoke tuxedo and custom tailored shirts reflects a growing demand for excellent quality of tailored garments that fit perfectly and look stunning.

ali mola (sc-sf-sgs-zxc)

safatewt — Tue, 18 Mar 2025 01:23:42 +0000

xzcbxz-bs-b-n-vcnm-jg-rsy-fsag-\sd-bvcxz- bvcx-n-cxmk-hfdk-ir-eyure-tds-vc -cxz-vcx-mhgd-lkjg-lo-tru-ewf-sdf-zx -vxz -bcxv-nmgd-md

Hi. Nice to be here.

Steve1 — Fri, 07 Feb 2020 14:30:00 +0000

I'm trying to get more active in the UP community but it seems challenging. I can't log in via the web site on my laptop, but my phone has no problem. I keep getting an authentication error. Any ideas why?

Can you indicate which category I should post in?

mirellehgf — Wed, 04 Sep 2024 12:35:10 +0000

Hello all :slightly_smiling_face:

This is my first post after joining so please forgive me if there is any mistake & provide kind assistance if I have posted to the wrong section.

I am new & I am already a big fan and love this community; I have a background in teaching and in education and feel I could help with documentation, at least for starters.
As a new member in this forum and wish to share and gain some knowledge; I want to create my own discussion to resolve my query and gain some knowledge though I have taken part in various discussion which is definitely helped me a lot.

Also in what category should be taken depends on what factors?

Thank you

What would you like to see more of on our UP Community?

DeliaSirghie — Mon, 01 Jul 2024 13:43:26 +0000

We're always looking to improve your experience on the UP Community platform. Let us know what content you would like to see more of! Your feedback is valuable in helping us tailor our content to your interests.

Addressing Discussions on Multi-Region Kafka on forum.up-community.org

jg8048046 — Tue, 20 Feb 2024 06:19:25 +0000

Issue Description:

Dear forum.up-community.org Administrators,

I am reaching out to address a notable interest and engagement surrounding the topic of "Multi-Region Kafka" on your platform. Recent interactions and threads on forum.up-community.org indicate a growing dialogue concerning this technical concept, which involves deploying and managing Kafka clusters across multiple geographical regions for improved fault tolerance, scalability, and data locality.

While forum.up-community.org primarily serves as a platform for discussions related to UP community boards and development projects, the discussion of technical topics like Multi-Region Kafka introduces significant complexity and requires careful management and oversight.

The proliferation of discussions regarding Multi-Region Kafka without adequate context, guidance, or moderation poses several potential risks, including:

Misinformation: Discussions lacking expert guidance may inadvertently disseminate inaccurate information or misconceptions about Multi-Region Kafka deployment strategies and best practices, leading to confusion or misguided implementation strategies among participants.

Operational Challenges: Implementing effective Multi-Region Kafka architectures involves intricate configurations, data replication strategies, and network optimizations to ensure data consistency and low-latency access across regions. Discussions without proper oversight may overlook critical aspects of deployment and management, potentially resulting in data inconsistencies, performance bottlenecks, or operational challenges.

Resource Management: Multi-Region Kafka deployments require careful resource planning and allocation to support data replication, network bandwidth, and storage requirements across multiple regions. Discussions lacking expert guidance on resource management may inadvertently lead to under-provisioning, over-provisioning, or inefficient resource utilization, impacting both performance and cost-effectiveness.

Given the technical nature of this topic and its critical importance for ensuring the reliability, scalability, and performance of Kafka-based messaging systems, it is imperative for forum.up-community.org to provide adequate support and guidance to community members engaging in discussions on Multi-Region Kafka.

Therefore, I recommend the following actions:

Provide Expert Guidance: Encourage the participation of experts or professionals with relevant experience in Multi-Region Kafka to contribute to discussions, share insights, best practices, and offer practical advice to forum members.

Moderation Protocols: Develop and implement moderation protocols to ensure that discussions on Multi-Region Kafka adhere to community guidelines, remain constructive, and avoid spreading misinformation or promoting risky practices.

Educational Resources: Offer educational resources, tutorials, or guides on Multi-Region Kafka to help forum members deepen their understanding of the topic and acquire the knowledge and skills necessary to design, deploy, and manage Multi-Region Kafka architectures effectively.

By addressing these concerns proactively, forum.up-community.org can maintain its reputation as a valuable platform for UP community members while fostering a supportive and informed community around technical topics like Multi-Region Kafka.

Thank you for your attention to this matter.

Sincerely,
James Bard

Free group cards

zoeymarie — Tue, 19 Dec 2023 04:29:14 +0000

Free group cards can be seamlessly integrated into formal employee recognition programs. By documenting these celebrations, organizations can track and recognize long-term contributions, ensuring that dedicated employees are duly acknowledged and rewarded. While signing a group card from sendwishonline, employees often engage in conversations about the recipient and their shared experiences. This interaction can lead to the development of new connections and relationships within the office, promoting a more interconnected workplace.
visit us: https://sendwishonline.com/en/group-cards

[Venomsoftware.org] Sell Inbox smtp - Office365 Setup Full Package 2023 For Spamming

venomrat — Tue, 07 Nov 2023 06:29:16 +0000

Office365 Setup Full Package 2023 For Spamming

SMTP Send unlimited & Spoofed Sender Without Fear of Suppendsion

• Smtp installed Bulk emails Software/ Spoofed Sender Hit Inbox for Office 365
• Bulletproof cPanel Hosting / Anti-RedFlag For Month Links
• Setup Link include Security Authentication ( 2FA ) Scan QR Code
• Office365 Attachment Offline with Autograb cookies
• Setting result report Telegram & Email
• Custom Fud HTML Letter /Converting best ideas to fully undetected HTML letter
• I will set everything up in inside RDP
• Guide & Detail schedules

About Smtp:

Smtp service provider with good inboxing
Limited 50,000 Emails Per day / 1 Months Validity
Domain & IPs warmed-up reputation
Bulk emails & spoofed Sender without fear of suspension.
Send text or HTML emails with attachements.
Smtp hit Inbox for Office 365, Hotmail, Outlook, Gmail, Yahoo etc

Any Sender emails software ready

About Webmail:

Webmail account with full access
Delivery text or HTML emails with attachements
Limited 10,000 Emails Per day

High rate inbox for Office 365, Gmail, Yahoo etc

About Bulletproof cPanel Hosting:

Full access on your host [File Manger,Domain Management]
Ignore spam reports/abuse complains
Anti-RedFlag Feel Free to spam, you will never get a red flag

We Guarantee that the link will last for 30 days

About RDP Bulletproof:

100% BULLETPROOF & NO DMCA
Full Root Administrator access
Spamm Friendly & All Ports are opened

Available Renew monthly

All Scampage Clean and Undetected 2023

Super Anti-Bot Protection
Multiple results receive options: Host/Email/Telegram
Supported ON ALL Devices - desktop / tablet / mobile
Autograb Cookies

=====================
About Custom Fud HTML Letter :

Converting best ideas to fully undetected HTML letter

Inbox Delivery Guarantee (No detected letter)

About Email list Database :

We will sell exclusive leads (only one person gets the lead).
All emails is verified and deliverable, Complete database

Business, Companies, CEO CFO, CIO, CTO, COO, CMO, Senior managers

About VENOM RAT + HVNC + Stealer:
HVNC Hidden Desktop
Hidden Browser Chrome/Firefox
Easy Hidden Control
Stealer: Passwords/ History/ Autofill/ bookmarks/ cookies
Hidden Log-in via Social Media
Reverse Proxy /Grabber Files
Advanced Online Offline Keylogger
Telegram Notification

Support WebGL / Auto Clone profile

SILENT DOC Exploit 2023 :
Unlimited Build Files
Unlimited Spread Files
Bypass Major AVs
Bypass Gmail, Outlook and all other email providers
Free Lifetime Updates
Fully Undetectable DOC Exploit.
Small Stub Size > 20kb
Download and execute any file.
Custom Template
Private Stub
Works with all Office Versions

Other required things, depends on what you need/want. I can provide much more.

VISIT MY WEBSITE : https://venomsoftware.org/

CONTACT ME ON Telegram : @Ven0mrat

I hope for beneficial collaboration and ready to answer your questions.

Best Wisheswonderful seight

Looking for a board

simonong — Fri, 20 Mar 2020 08:14:50 +0000

This is the first time i heard of UP! But i am hunting for about 2 months for a dev kit that has
1) min 4 analog input 0 to 10v
2) min 4 analog output 0 to 10v
3) min 4 digital input
4) min 4 digital output 5vdc and above
5) touch screen support

Does Up board has the above spec or with add on just like Pc104 or arduino shield or Ras pi shiled?

Thanks

Simon

Up Board + Realsense r200 + Ubuntu 18.04.2

ipeerbhai — Sat, 09 Mar 2019 09:35:12 +0000

I picked up an intel robotics kit dirt cheap, and am slowly spending a ton of time getting all the pieces up and running. I wanted librealsense, opencv4, and the 40-pin header all working. I want to putz around with depth, lidar, and neural networks... Oh, and watch netflix/sling... maybe run a 3d printer off it, too...

For anyone who is going to get one of these kits, and wants to get the whole shebang back up and as close to modern as possible, here's what I had to do.

Ubuntu 18.04.2 UP instructions worked perfectly! Yay! I was able to blink leds via the file system echo > ... calls.
librealsense v1.12.1 is the last version to support the r200. It doesn't compile any longer. I had to #include in archive.h, types.h in the librealsense source.
2a. I could get the examples to compile, but getting them working with the freeglut library ended up killing video playback in chrome/firefox. So, I decided to live without some samples...
I used these instructions for opencv 4: https://www.pyimagesearch.com/2018/08/15/how-to-install-opencv-4-on-ubuntu/ -- this mostly worked, but the final build directory location is incorrect. It's in /usr/local/lib/python...
I followed these instructions for netflix: https://linuxconfig.org/watch-netflix-on-ubuntu-18-04-bionic-beaver-linux -- it worked.
I followed these instructions for sling: https://linuxconfig.org/watch-sling-tv-with-firefox-on-linux -- it worked, with a warning. Warning -- get chrome first, then do this. Firefox will detect as Windows Chrome after the useragent hack, and downloading chrome becomes difficult.

I'm still hacking on getting all items to work, If I can get it all to work, I'll reply to this thread with any changes. Hopefully, anyone else who wants all this to work on an Up board will find this useful... So far, I've burned through about 50% of the 32gb eMMC, just installing libs/compiling...

I might go all the way and try to get ROS working as well, anyone get Melodic Morenia up and running on an UP board + realsense + garmin lidar lite in ubuntu 18.04 Desktop?

Hello from the Gold Coast in Australia.

PhilS — Thu, 21 Jul 2022 06:03:21 +0000

Hi there from Aussie.. I am just starting to use the UP board Squared Pro for applications in Industrial control and data logging at the machine level. These applications will rely heavily on Ethernet /RS485 communication using Modbus and Ethernet IP protocols.

up squared board g_mass_storage not reliable and can not work at superspeed

harry123 — Sun, 07 Aug 2022 23:21:11 +0000

I'm having trouble with g_mass_storage on UP Squared Series board

CPU: Intel(R) Celeron(R) CPU N3350
Memory: 4GB
OS: Ubuntu 20.04.4 LTS
kernel: Linux upboard 5.4.0-1-generic #0~upboard5-Ubuntu SMP Fri Jan 7 11:53:57 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux

I tried to insert g_mass_storage module with the command:
sudo modprobe g_mass_storage file=/dev/sdb stall=0 iSerialNumber=123456

It only works as 480Mbps device when plug into a superspeed usb port, and having trouble when plug into some of the superspeed+ port.

Anyone have used g_mass_storage module at 5Gbps or higher?

system kits w/ DCI debugging out of the box?

ColdComfort — Fri, 02 Sep 2022 13:43:11 +0000

Hi All,

I'm trying to demonstrate debugging/tracing Intel hardware via DCI interface (or SVTCCA) using OTS hardware, and I've read that some of the UP system kits explicitly support this via MSR settings (IA32_DEBUG_INTERFACE) as well as exposed BIOS options (HDCIEN, etc).

Can anyone recommend a UP system kit that they have experience with DCI debugging working out of the box? Or, if not out of the box, merely requiring a simple firmware update? I'm trying to avoid hacking bios registers and rolling my own system support for DCI.

Because this is for demonstration, the actual hardware capabilities of the system are not important. I'm ideally looking for Intel CPU/PCH of 6th to 10th generation, which are the limits of my Intel SS 2020 release.

Thanks!

UP4000 Possible to power through 40 GPIO Connector?

Fri, 16 Sep 2022 14:55:20 +0000

Hello,

We are currently using the Upboard in our products and we are powering them through the 40 pin GPIO port.

Is this also possible with the UP4000 version?

Thank you in advance.

Robomaker pro Kit and Hamster SW compatibility

ppuedom — Mon, 06 Jul 2020 12:20:06 +0000

From the UP2 documentation is not clear if Hamster SW runs is compatible with it or not.

It seems from https://wiki.cogni.io/Category:HamsterProKit the installation script is for Ubuntu 16.

Is the RoboMakerProkit Hamster SW available for Ubuntu 18 and ROS melodic and working with the UPsquared Robomaker pro kit ?

Thanks
Pablo

SFP Cage In Future?

geese780 — Tue, 01 Dec 2020 14:12:23 +0000

Hey Everyone,

Hope this finds everyone well. I was wondering if there are any hardware updates coming in the future to handle SFP Modules?

G'day from Sydney, Australia!

Bobbyrob — Wed, 29 Dec 2021 06:43:48 +0000

Currently researching a board to use for a medical device prototype planned for development through 2022.

I will be using ML heavily in the device, and I'd prefer to use x86. The Intel Neural Compute Sticks look intriguing. I'm writing my own algos so FPGA will be really interesting to implement too.

BIOS can't find any USB device

lin — Wed, 11 Aug 2021 03:09:17 +0000

Hi there,
I have a up-board(2G RAM , 32GB eMMC)
BIOS is't show any usb device,and the Boot options is empty

How to fix the issue??
thanks.

BIOS Information: UP-CHT01 R1.1(V0462M11)(01/22/2018)

Windows 10 - Questions

BLITZKRIEG — Tue, 17 Nov 2020 12:24:03 +0000

Hi all,

Has anyone tried the below setup? UP board 04/64

I am planning to get it and test, however, I would like to know if anyone has some experience with:

Does the sound in windows work?
Can you watch movies in the browser? Disney, youtube, Netflix? how is it smooth?

Thanks in advance.

ORBSLAM & Upboard

Andreacec — Mon, 16 Nov 2020 13:11:38 +0000

Hello

I am trying to finalize a project of a robot working with a stereo camera and ORBSLAM algoritm.

I tried Intel i5 to support above hardware but CPU is working at 275%!

Do you have similar experience?

Which board do you suggest?

Thanks!

Andrea

Anyone know how (or where ) to connect so that I can use ssh?

JAH — Fri, 19 Jun 2020 15:53:45 +0000

Anyone know how (or where ) to connect so that I can use ssh?

I am starting my autonomous Lego car project

Albider — Fri, 10 Aug 2018 12:21:12 +0000

Hello,
I bought the Robotics Development Kit, with an UP board and an r200 Realsense camera.
My objective is to build a Lego autonomous car controlled by an Up Board.
I am now choosing what parts I will have to purchase to make the car. I already have a lot of vintage Lego Technic parts, including a 9v motor.
I hope I will find in this forum people who can help me choosing the correct electronic parts.
Bye!

UP LoRa Node

aal7 — Tue, 12 May 2020 08:34:31 +0000

Hi. I'm sorry if this is in the wrong group. Could an admin move it if necessary?

I'm writing to ask about the UP LoRa Node. It's not clear to me exactly what it does or how it works. What I'm looking for is a device which is programmed and ready to transmit LoRa signals to the local gateway. I can't tell whether the UP LoRa node does this. Is it a ready-to-go product or a development platform for which I need to write low level firmware? There is mention of ready-to-go firmware but I can't find any description of what that firmware does. The user manual goes into great detail on how to set the keys but says nothing about how to make a transmission (step 5 is "connect to gateway" and there is no step 6!). It also talks about Grove Cables and USB to RS232 converters - are these included in the kit or do they need to be purchased separately? Are they necessary for learners or will it work out of the box?

Could someone give me a basic summary of this device please?

Many thanks and best wishes.

Video capture

koen123 — Wed, 13 May 2020 09:57:26 +0000

Hello,
We are looking into making a video capture system that records for 3 days straight at a resolution of 1080p. We have an up squared board available to us.
We were wondering what the possibilities with our board and the desired system are.
What is the maximum framerate to expect? And what are some good camera's to use?

If you have any suggestions feel free to let me know.

[SOLVED]UP AI Vision developer kit getting started guide

AILuver — Mon, 17 Jun 2019 13:11:37 +0000

Hi All,

We purchased 2 kits for dev, it comes pre installed with openvino and other tools. Is there a getting started guide to using the kits? Ive compiled the samples through Intel system studio, but if I terminal into the computer vision sdk directory and try to activate openvino with source /bin/setupvars.sh to try to then compile it doesnt work. Just says no such file or directory even though the files are there.

The problem of UP squared BIOS booting on Vxworks7 BOOTX64.EFI(by using BOOT_MULTIBOOT option)

devilhands — Mon, 24 Feb 2020 01:54:02 +0000

I have faced to booting problem on Vxworks7.
When I used orginal Up2 BIOS on your Board, it was worked well.
but when I used and compiled Intel Atom® Processor E3900 Series Release, it has the problem of booting.
https://software.intel.com/en-us/articles/uefi-firmware-project-for-intel-atom-processor-e3900-series-processor-platforms

Is Source code different? I'm using Download Object Modules 0.71.
Could I get BIOS source code to work well or be optimized?
Because even if UPBOARDA.X64.0071.R01.1809030927.bin (UEFI x64 firmware, release mode) is used, it's not working. It seems that it is also different to orginal BIOS.
Please help me. Thank you.

[SOLVED/ANSWERED]Up Squared board using Windows 10 and OpenVINO

cesarpgouveia — Thu, 20 Feb 2020 22:23:27 +0000

Hi,
I am entering this world of up boards recently and I'm really interested in one of these boards:

However I would like to clarify some questions before purchasing any of your products.
1 - The UP Squared with the celeron Duo is compatible with OpenVINO? I can run OpenVINO through that CPU?
2 - The UP Squared with the ATOMx7 comes with a ubuntu image. This image comes with all dependencies and requirements to run OpenVINO, Intel Movidius stick, etc?
3 - Can I buy a UP squared pack (active cooler, power supply)? I have seen in the catalog a Up pack but comes with only the Up board and not the squared version.
4 - Can I put a Windows 10 or Windows 10 IoT Core instead of Ubuntu in this Up Squared board?

Thanks,
César.

UP LoRa® Computing + The Things Network starter kit Installation

broadwave — Thu, 20 Feb 2020 00:16:10 +0000

I bought the UP LoRa® Computing + The Things Network starter kit for developing the edge gateway using LoRa. but I cannot find how to set up and install manual.
For resgistraion The things Network, How can I get EUI number ?

Non Neural Network Programming (CV Image Processing)

myxed — Sat, 28 Dec 2019 21:14:25 +0000

It's not entirely clear to me if the MyriadX based boards are programmable at a low level. We're not looking for an inference only solution. We're looking to perform low level ISP/CV type parallels processing on image frames (non neural network).

Is this supported? Or do the VPU boards only run inference neural networks?

Hello from Italy!

Sil — Thu, 16 May 2019 14:37:06 +0000

Hello everybody!

Even if I have already written something on this forum, I have never introduced myself.
I am Silvano from Italy and I am working as a software and firmware developer for an additive manufacturing company. I have also a PhD in applied electromagnetism (remote sensing).
You can find something more about me on my personal website: http://www.silvanobto.it/.

I hope to cooperate with you on this forum in order to give you some potential solution I find using the UPboards and to get support for my problems!

Cheers!

Silvano

Hello all! R&D gurus coming please step inside...

solutionsinfinite — Sat, 09 Mar 2019 14:52:21 +0000

Hi all!

I'm Jamie from the UK. Before I begin must say I love this website especially the 'Unboxing & Project Sharing' part of the forum, some of the creations are fascinating and I had not even noticed the need for some of them!

So a little background, I'm from the UK as I mentioned, a retired (or shall we say, career change as I am only in my 30's?!) Commercial Pilot and currently in the Property game as a Developer and landlord. Recently I/we have started installing Home Automation in products into houses in both the ones I own/renovate and also for clients who desire the 'things' in their homes.

The system I work with is called Elan Home Systems and is very good but it could be better and they welcome third-party hardware manufacturers to integrate products into the platform. These can range from manufactuers such as Hayward Industries (Swiming Pool Control) to Sonos (Multi-Zone Music). From a installers view I can see what customers want and also where Elan and other high-end (£15K-£20+*) home automation systems (Control4, Savant, RTi, Creston etc) are lacking in terms of projects and interactions so if anyone has any questions then please let me know via this thread or PM if its private.

The 'internet of things' (IoT) and home automation is expanding at such a rate that platforms like UP and other similar product/frameworks have huge potential at tapping into this market. There are two building blocks to Home Automation like most markets, open and closed, and when I mean closed I mean very closed. Some of the wonderful open source projects you may have heard of such as openHAB, Home Assistant, Domotics, etc. In some aspects, they are better than the preparatory systems as there is more testing and development because it's freely available when the ones I deal with are a very close nit and DIY installs using the hardware are not possible due to the software configuration tools not being in the public domain.

Anyhow, for some time I have had a product (Video/Media related) in mind for the home automation systems, not just Elan. I have been scratching my head wondering where is the best place to find some people about this idea, then I remembered this forum!

Anyhow, I have waffled on loads so I will get to the point...I'm looking for some developers (hardware and software) for a project. If you are interested then please fire me a private message. The intended software for the base of the project is open source and distributed under the GNU General Public License. The hardware required for it is already available but needs to be tied together and be stable (stability is very important). AS mentioned Its media/video related.

Many thanks,

Jamie

*total cost

Switching from Ubilinux to Windows 8.1!!

guzzarish — Mon, 14 Jan 2019 12:46:20 +0000

I have several Up boards running Ubilinux, and need to install Windows 8.1 on one of them. When I boot from the Win 8.1 ISO usb stick, I get an immediate message:

Recovery
Your PC needs to be repaired
There isn't enough memory available to create a ramdisk device
Error code 0xc0000017
[. . .]

I suspect this has something to do with UEFI and I'll need to change to BIOS to allow me to load a different OS, but I'm not sure what should be changed. Suggestions?

Give a name to next gen. UP Squared! Come to contribute!

Aling — Mon, 19 Nov 2018 09:40:09 +0000

Hi guys,

We are planning a new generation of UP Squared and we would like to launch it in a few months.

We have figured out a few names, and we would like to know how you think about it. For now, allow me to give the limited information about the product, but do not limit your creativity in giving it a cool name. Come to help us give a cool name to next gen. UP Squared.

Product info:
1. The size is very closed to UP Squared. 120x120mm
2. Based on 8th gen Core i CPU
3. Comprehensive I/O and expansion

Now Vote for it..or suggest something even cooler!

UP Community Forum Structure

DCleri — Fri, 14 Dec 2018 14:22:17 +0000

We are looking at improving our community, starting from the forum, making it easier to find the information and to ask questions.

Here there are a couple of options on how we could update the forum structure. Also please provide any suggestion you might have in the comments.

Thanks!

Moved: Give a name to next gen. UP Squared! Come to contribute!

Aling — Fri, 16 Nov 2018 13:44:54 +0000

This discussion has been moved.

Intro from NL!!!!

divines — Fri, 09 Nov 2018 13:26:44 +0000

As the subject already says I'm a backer from The Netherlands (The Hague to be precise) so this is a local game for me.
Similar to Shane I'm a full time Linux/Unix engineer.
I've received my Up yesterday and hope to have some time this weekend to play around with it.
My plans for the Up are to see if it'll make a nice playground for some linux clustering stuff, LXC and Ceph.downloadnox.com Showbox Mobdro

If this works out I'd like to make my own low cost alternative to the Canonical Orange Box.

Intro from Stockholm

divines — Thu, 08 Nov 2018 07:29:45 +0000

Greetings fellow Uppers (?!).

I am a 38 (ok fine, in 20 minutes 39 ...) year old software engineer and my background is UNIX administration, being a UNIX teacher but first and foremost a software engineer. My experience ranges from low level assembly/C, up through C++ and currently I am working as a C# developer.

I am currently playing around with my board trying to see what works and what doesn't. Apart from that it gets a bit hot (can't keep my finger on the heatsink for more than a few seconds) it's working sort of OK. With better drivers I'm sure it'll be even better.

I hope to attend Embedded World, and if I do, I'll come shake some hands.

project . brain gear

emiway — Thu, 08 Nov 2018 11:46:48 +0000

This project follows the logic that “dad built a unique computer especially for me” feels so much better than “dad bought me a pc”…
The original idea was born around the Raspberry PI, however I quickly realised that I would need a much powerful engine… and the UP Board came about.
It is made of laser-cut Plexiglas (bent with the air gun of my soldering station), a 13 inch full HD screen+controller board off ebay, a home made Li-ion battery pack, a difficult-to-find Li-ion charging controller that allows simultaneously charging and using the battery, a self-designed power board to handle startup/shutdown logic and the 5V/12V needs. The spare space was intended for an SSD but as USB3 has issues I gave up for the moment..
Software is a Mac-flavoured Ubuntu with UP kernel and loads of cool software including Snap4Arduino and a home built wifi connected board with plenty of sensors for experiments on IoT.
The design is rather pleasant and I personally don’t think the pictures do justice as the transparency is difficult to capture.
My son loves it so I thought of sharing… should anyone be interested in the details, feel free to drop me a message.https://downloader.vip/rightmove/ downloader.vip/kijiji/ downloader.vip/quizlet/

Intro from NL

divines — Thu, 08 Nov 2018 11:42:07 +0000

Hi all,

GPIO Hi-Safe_v2_20170907 c# for communication

panipuri — Sun, 28 Oct 2018 14:47:01 +0000

I working c# application for GPIO communication .
I have AaeonEAPI.dll and Hi-Safe_v2_20170907. i am getting the error like
' Additional information: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) ' (EApiLibInitialize error).
Kindly let me know how i can resolve it.

Problems with ubuntu 18.04

Arvindmundhe — Tue, 30 Oct 2018 10:06:40 +0000

I am new to open source world. I recently installed Ubuntu 18.04, after getting tired from windows errors. But it seems Ubuntu 18.04 is in very beginning stage or it is not suited with my machine (Asus x550l) or I did some mistake while installing Ubuntu (or probably installing it was a mistake.)

The problems are

my pad and mouse clicks become non responding, keyboard keeps on working but clicks can't be made. And frequency of this problem is increasing with time. Only solution I found was restarting and these days I am restarting in every hour or two.

I am unable to use numeric keypad. Even with external keyboards, they are non responsive. I have tried multiple keyboard settings but couldn't solve it.

I tried installing anaconda, there were some errors. Now I can't reinstall or uninstall it.

I wanted to uninstall dark table but it isn't shown in ubuntu software.

Firefox doesn't allow to login in many websites. It seems to be in built and I can't see it installed in Ubuntu software.

Any suggestions..??

What are the best things to do with a clean Windows 10 installation?

Bansisingh — Tue, 30 Oct 2018 10:04:13 +0000

So, my PC is having issues and I’ve decided on a clean install. I feel like some of those issues were attributed to me not configuring and setting up windows properly, like for example, my audio driver was not working properly.

Can someone recommend the steps I should take with installing drivers, disabling Windows 10 junk etc? Most YouTube videos I’ve watched have comments saying that the methods on there are flawed and done by people who don’t know what they’re talking about.

Low Power States

battatawada — Tue, 30 Oct 2018 10:03:50 +0000

Hi,

Looking to buy the UP2. Had a few questions regarding the supported low power states:
1) Is sleep state (S3 or S0i3) working on the board with android?
2) What are the other low power states supported by the hardware and are all of them functional in android too ?
3) I understand that for proper low power support, BIOS support is essential. Which states are supported by the current BIOS release ?
4) Is the BIOS source open, can it be re-built and flashed ?

Thanks,

Hello From Alaska!

blaube — Sun, 28 Oct 2018 23:05:30 +0000

I'm in the planning phase of multiple projects; home network with HTPC, 2 NAS, ...turn old laptop into media streaming device,...and for my reason here an auto PC. I was originally going to use a Raspberry Pi, but then decided to use a LattePanda. But, I saw a video that compared the LattePanda to the Up Board and now I feel the Up Board will be better for my application. I understand the Up2 has the same GPIO pin out as the RaspPi which helps my project go a bit smoother in terms of sending audio to the processors from a hat. Now I need to decide on OS, power, peripherals, Arduino, etc. I'll be asking a ton of questions, so any input will be appreciated.

Moved: UP board heat spreader mounting holes dimensions!!!

DCleri — Sun, 28 Oct 2018 14:42:42 +0000

This discussion has been moved.

Hardware parts / spare parts for UP-squared

petru — Wed, 22 Aug 2018 14:35:39 +0000

Does any one know from where I can purchase the 40 pin eDP to LDVS cable which is sold together with the 7" inch Touch Panel Kit. It is the flat ribbon cable no wider the 13mm and 20 cm long. The up-shop has redirected me to the community for help ...
Thanks in advance for your time and help.

NoDistroTemplateException ubilinux

shamali — Fri, 27 Jul 2018 02:49:33 +0000

Hello,
I get the error
aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for ubilinux/dolcetto

when I run any copmmand with add-appt-repository.

Can Someone help me to get around this problem ?Is it OK to try and Dabian fixes
Thanks in advance.

Shamali

Java Installation on ubilinux

shamali — Thu, 26 Jul 2018 05:25:34 +0000

I have installed ubilinux on the upboard. Now I need to install java. Is there a guide. I found just one guide and that didn't work for me. Its not from the up community so I am scared to pursue it as I might hit a dead end. I need to replace a Raspberry pi with an up board. The code is alreadu written in java

Hello from Shanghai, China

fino — Mon, 16 Jul 2018 05:01:17 +0000

I got 2 UP^2 board, and working on GPIO , ubuntu16.04,
using mraa lib,
output is simple works,

but for input, didn't figure out how to set internal pull-up or pull down;

BR fino

UP based system for data collection

pial — Tue, 26 Jun 2018 15:55:17 +0000

Hello !

I'm a PhD student and I'm developing a system to record dialogues (audio+video).
The device includes an UP board, a Realsense camera and a microphone.

Best regards,
Pierre

Moved: GrovePi+ and Up^2 with Python?

DCleri — Mon, 28 May 2018 02:31:16 +0000

This discussion has been moved.

New for robotics applications

FCam1 — Thu, 24 May 2018 16:05:13 +0000

Hi ,
I am a young engineer, currently I work on a robotic project in a french laboratory.
The robot prototype embeds an up squared with ROS.

Moved: Hi All, Need help evaluating the use case of Upsquared for my project

DCleri — Tue, 15 May 2018 06:25:30 +0000

This discussion has been moved.

Embedded World 2018 visit by UP Team?

Shazter — Fri, 09 Feb 2018 15:16:41 +0000

Hello,

does the Up Team has any plans to visited embedded world 2018 in Germany to show their devices to possible customers?

Best regards

Help where has everything gone?

Martin Hall — Wed, 20 Dec 2017 10:14:56 +0000

I have a set of links in my browser that help me set up a new up-board, one of them shows the procedure to add and run the ubilinux kernel with other linux distributions.
I killed my last up-board so am waiting to recive my replacement (convinced wife it was a good Christmas present) so i need to do a full reinstall.
HELP none of the links work any more??
where should i be looking for the old posts.

I know this is in the wrong place but have no option its the only place i can put it
Thanks
Martin.

greetings!

Rob — Wed, 20 Dec 2017 11:06:54 +0000

Hi there forum,

i've just acquired my up2 board, will be using this to develop a musical instrument.
It's a sample / loop based system using puredata, its a setup i use for live performance
and i have been developing this for over a few years. With the up2 i hope to build everything
into a single housing and ditch the use of a laptop.

greets,
Rob

New project for me, new things to learn!

Sebastien Tardif — Sun, 05 Nov 2017 12:56:00 +0000

Hi! I'm from Quebec, Canada and I just received my Up Squared board. I'm planning on making a nice little car PC with this and I'm still waiting on some components to start the project.

I usually take existing project and just follow the instructions, but with this one, I'm starting from scratch and learning as I go Will probably do a tutorial once I'm done!

Hello from Daniele and question

daniele — Sat, 28 Oct 2017 08:52:18 +0000

Hello,
I have just joined this community and I would immediately have one simple question. Can you please advise the basic difference between:

- up
- up core
- up squared?

Thnaks,
Daniele

Hello From mjhall1961

Martin Hall — Sun, 29 Oct 2017 08:15:22 +0000

I have owned my Up Board for a while now but just getting to use it. It was purchased as a Raspberry Pi replacement to act as a print server for my 3D printers.
I was fed up of the Pi shutting down my wifi network all of the time.
I installed Ubuntu at first but have now installed Mint as it has a nicer front end.
I will be needing help? so anyway lets see how i get on with this project.
regards
Martin Hall
From the UK

Hello form the US

Leonardo Bello Puentes — Sat, 07 Oct 2017 19:19:58 +0000

Howdy,

First for all, let me say, these Up Boards look really nice for any kind of projects, congratulations!!!. I am planing to start a small project related to encryption algorithms and control systems, but before buying I have a couple of questions:

1. This combination of products are compatible?
UP Squared Pentium Quad Core 8GB memory/128GB eMMC, M.2 2230 WiFi kit for UP Squared ABS Chassis, UP Squared Case ABS plastic , UP Squared power supply 5V@6A, windows 10, Matlab, and Altera Quartus.

2. Is there a student discount?

3. How many days will it take for my package to be delivered (United States)?

Thank you.

Hello form the US

Leonardo Bello Puentes — Sat, 07 Oct 2017 19:06:43 +0000

up board windows 10 and gpio

achille — Thu, 25 May 2017 12:45:29 +0000

Hi every body.
this message is written to up board technicocommercial team.
For the project i'm working on now, I need a x86 cpu which can run windows and have direct acces to at least 20 gpio pins.

I've tried Lattepanda but the problem is that, with lattepanda, we can't acces directly to gpio this has to be done through serial communication with the arduino leonardo which is attached on the lattepanda.

My question : with up board, do we have direct acces to gpio ( like a memory cell) and if yes, do you sell an upboard with windows 10 installed, including licence?

Thanks for your reply
michel

Hello from Taiwan

Kelvin — Sat, 02 Sep 2017 04:19:35 +0000

Hello everyone,

TPM is to encourage the new way for new automation by distributed control with Programmable Automation Controller (PAC).

We have a automation application that is combined motion control and vision processing.

UP2 is the controller.

Please take a look at it.^^

[video width=425 height=344 type=youtube]Z7uNZd1Kj1Y[/video]

myhealthpeak com/vedda-blood-sugar/

Takni Manaa — Thu, 31 Aug 2017 08:16:04 +0000

outcome in emotional and real changes in a woman's emotional and real well being. There are both external and internal factors that outcome in this material vedda blood sugar change, and the amazing news is that there are stuff that can be done to mitigate or even eliminate some of the awful symptoms. The first natural PMS remedy that should be obvious to most is diet plan program. Modifying your diet plan program to healthier and veggie centric meals, absorbed promptly will assist in balancing your sugar level which is thought to dive ladies with premenstrual issue or pms. Some females tend to eat too little, some eat too much, and some starve and binge. Women and many physicians overlook this aspect of PMS therapy when searching for convenience, but what we eat and our meals are the foundation of our health and fitness and health and fitness. Here are some meals and nutritional value to consider to help mitigate your symptoms normally. In to stabilize your vedda blood sugar stages levels, you should eat meals that are rich in whole fiber. In addition, complex carbohydrates enhance your this level which elevates your feeling of well being. For complex carbohydrates, eat whole fiber bread, cereals, and pastas. Enjoy clean vegetables and fruits, several times every day. Get reacquainted with legumes and brown rice. Make sure to lessen intake of improved white-colored flour and sugar. Don't drink sodas and eat whole fruit instead of juice. You also want to lessen intake of soaked fat. In equipment for being troublesome to your middle and body bodyweight, soaked fat can elevate your oestrogen level, which will only intensify your symptoms. Remember that not all fat is your enemy. Decrease your intake of red various foods, dairy, and ready meals, and you will decrease intake of soaked fat and other harmful human extra fat. This is just the beginning of your natural PMS cure. There is so much more to cover and so much more PMS diet plan program information to discuss. Look for my other articles on this important topic that effects so many. When you live for plenty of time, you will certainly find exceptions to the norm. But, it is probably secure to say that very few everyone is protection to the temptations of fast-food. Between the enormous quantity of efficient marketing, as well as meals additives that leave an overwhelming craving for the taste, most of us have been hooked at some point or another. Even ubiquitous rat analysis validate that the sacrificial rodent population is susceptible to the same addiction. These your meals are not only outstanding in fat and calories... they are also devoid of any real nourishment. Plus, they absence a essential fat-fighting supplement that you simply cannot afford to be without. It is fat-free, cholesterol-free and calorie-free. Interestingly, it is almost missing in most of

hi, nice to be here.

Brian Beuken — Fri, 25 Aug 2017 19:17:03 +0000

Hello.

Hi nice to see another interesting maker board on the market. I just took delivery of my Up2, I went for the celeron version since I have been building a collection of SBC's with a condition that all cost under 100euros (KS price). the Pentium version went a bit out of that limit

I'm mainly interested in using SBC's as educational tools to teach programming, especially games and graphics programming as they can effectively be considered small consoles with restricted resources I consider SBC's to be good foundation systems for new programmers who want to make inroads into the commercially restricted console genre.

Im especially looking forward to playing with the GPU on this, as it promises to be the most powerful of all the credit card (pushing it a bit here but...) SBC's.

I'll have to get hold of a power unit for it, and then install an OS, but in the mean time I'll read up on others experiences and see what's what.

Hi

Phil — Thu, 10 Aug 2017 16:41:14 +0000

Hi I am brand new to the forum. Hope I can find out the information I want to :-):)

Hi all!

Vladislav — Wed, 19 Jul 2017 08:00:16 +0000

My name is Vlad, I am doing a project with computer vision and AI.

[video]https://player.vimeo.com/video/223524726
[video]https://vimeo.com/200151916[/video]

Hi there!

Oliver Lenert — Mon, 17 Jul 2017 11:31:27 +0000

Hi all,

someone here decided, to use up-boards in our company for some small embedded projects. So now I've to deal with this really [strike]bad[/strike] not documented piece of Hardware. Maybe some people in this fine forum are able to light my darkness.

Best Regards,
Olli

Household Items Online Shopping

Huge Cart — Fri, 23 Jun 2017 17:55:23 +0000

If interested in Household Items Online shopping then come to hugecart.in for so many product and superb schemes.

Hello!

Dominic — Tue, 06 Jun 2017 21:59:42 +0000

Hi everybody, purchased an UP 2/16 last week.
Installed ubuntu 16.04 with up kernel, testing my apps.
So far very pleased with Up's performance and build quality, but struggling with i/o.

Greetings from Quebec, Canada

bruce — Tue, 02 May 2017 15:19:11 +0000

Hi, guys, this is Bruce from Earth2.0

Intro from DELHI, INDIA

mohit sharma — Fri, 04 Nov 2016 09:24:31 +0000

Hi
I purchased a new up-board and want to make a automation system,
which starts from Android app and also feedback from the devices at apps.
For that i am seeking software, frameworks is best to make database for feedback log files and etc.

Hello from Germany

Sven — Fri, 31 Mar 2017 08:30:08 +0000

I received my makers edition delivery beginning of this week.
So far I installed Ubuntu 16.04.2 LTS without any problems. Installation was very fast on eMMC and also it boots quite fast.
I also added Kodi and other stuff.
Looks like a very good solution for a media center.

Best regards

Helllo :)

reczz — Fri, 17 Mar 2017 20:15:28 +0000

Geeking with other OS then discribed

i need some help

Hello from The Netherlands!

Martin Borghoff — Wed, 08 Mar 2017 23:15:44 +0000

Hi All,

installing/Configuring Linux (all Kind of platforms) is one of my day to day tasks.
Started with Linux in '96 building internet nodes with the slackware distro.

2017 -=> I Spotted the UP Board!

Amazing so much power Love the specs of the Up Board. just ordered one with the Case.

Can't wait to start building things. I hope the fan is not making to much noise as my Odroid XU4 does.
Any hints from the community about supported linux platforms ubilinux, ubuntu, Yocto-based?

for example

1. which distro is stable for mediacenter ubilinux?
2. building a LAMP server choose ubuntu?

Any links would be great!

Anyone already tried other distro's?

ArchLinux is also available anyone tried it already?
https://wiki.archlinux.org/index.php/Up-board

Regards,
Magnetix

Hello, From Kent

Dan — Thu, 26 Jan 2017 09:35:16 +0000

Hello everyone, I've had my UP boards for a few weeks now, I wanted a small silent PC for running my own webserver software for Artificial Intelligence (AI). Its only a demo at the moment but it is working great now and over time I will get more boards and make it multi-processor so it can cope with lots of simultaneous users. AI is a hobby, I am looking to build sentient software, I know its a hard thing but fun!!

www.danielburke.com

Anyone else built a multi-board system?

Hello UP Community!

Mikolaj — Fri, 18 Nov 2016 13:39:50 +0000

Hi,
My name's Nick, I am a high school student from Poland.
I'm interested with physics and math (doesn't mean I'm good at them). My hobby's robotics.
After making myself a littlebit familliar with the Raspberry Pi board I came to a conclusion that it's power will be insufficient for what I wanted to use it for.
I was also looking for a stereoscopic 3D camera with IR to my project, so I found Intel RealSense cameras. It appears that they're still low-res cameras - gonna be waiting for some newer models. At least 1080p IR (night vision).
And of course I know I could use a PC to process all data but I think it will be more interesting with a small, powerful PC onboard a robot.
So it seems that everything led to the Intel RDK and to the UP boards.
And here I am... With a couple of questions to you.

Glad to be here!

Hello !

tenum — Thu, 10 Nov 2016 10:48:59 +0000

I work with an organization in France, that allows students to do scientific measurements (temperature, pressure, aerosols, etc...)
We want to use the UP board to host a FTP server to collect these data and provide graphics and maps to users.
Fred

Hello from Italy

Michele — Wed, 19 Oct 2016 20:45:39 +0000

Hi,
my name is Michele and I'm a freelance electronics engineer.

I wil use Up board (2 GB RAM, 16GB emmc) in 3d Unity based videogames running in Ubuntu.

This games will run in kiddie rides of a famous italian brand.

Hello from Italy

Livio — Tue, 18 Oct 2016 06:49:59 +0000

Hi, my name is Livio, I live in Rome.
I bought my first Up board, 4 GB RAM and 64 GB eMMC, at Maker Faire in Rome last 16th october.
Now I have installed Windows 10, but I want to try also Windows IoT and build my Home Automation.
Bye

Hello from Thailand.

Chris Botha — Tue, 11 Oct 2016 23:50:50 +0000

Hi All,

I just ordered the up 4/64 and 7 inch TS. Gets here next week hopefully.

I have been playing around with RPi3b running Iot and a variety of arduino boards to produce an app and hardware solution.

Currently have to use a PC interface as the RPi is just that bit too slow to handle it in a user friendly manner.

arriving next week are my 360 servos too, so will dump the arduino side completely and run entire lot from the UP including webserver for remote access to the compiled gifs and image sequences.

Heres to hoping its fast enough...

more info on current build in UWP for windows running on either the RPi or Win10.

http://ceebeeoddsandsods.blogspot.com/2016/10/360-cam.html

Hi from France (Toulouse)

AUCOUTURIER — Fri, 14 Oct 2016 09:44:07 +0000

Hi Makers,

i am seb from France , Toulouse, i just receive my Up-board 4/32 today.
First impression, i am just a little bit disapointed, i order it from Europe Local reseller , delivery was fast : 5 days, but packaging was bad.
The card was only package in bubble bag, not in the nice up-board box we see on web,and no instructions papers in explainimg how to start.

Luckily i know how plug, start and use it, but not a nice point for beginners guys, the raspberry pi packaging was greater.

But let see how the play experience is ... will boot and let you inform ..

Bye

Hi from Delhi, India !!!

Sahaj Sarup — Fri, 07 Oct 2016 20:43:57 +0000

Hi,
My name is Sahaj Sarup and I am a tech YouTuber. youtube.com/sahajsarup
My main field is Raspberry Pi, Porting android to x86 and Raspberry Pi and basic linux stuff.
I review other development boards from time to time and this week i will be reviewing the UP Board.

Intro from Italy the 2nd

Gianluigi Belli — Sat, 10 Sep 2016 06:44:05 +0000

Hi, I'm from Italy and I'm a software developer.
I'm making up an strongly automated house. It is filled with commercials devices based on KNX protocol and it has various RPis (from RaspberryPi 0 to 3) as compendium for some activities.
I've purchased an Up Board to try to give it more brain keeping low consumption and few room.

Hello All from Ohio USA

Terry J Withers — Wed, 07 Sep 2016 13:29:22 +0000

I am new to the forum and joining from Ohio, in the USA. I work as a systems engineer primarily in manufacturing, and I design electrical and mechanical solutions to solve manufacturing challenges. In my free time, I like to dabble in electronics, and set up servers in order to make life easier, at least after the many initial headaches.

I stumbled across the UP-Board over labor day weekend, and wanted to ask the community if anybody has tried using it with the Bitscope Blade. I would love to try and use the UP-Board in a manufacturing environment, and being able to use 24, or 48VDC would be very helpful.

Does anybody know if you can power the UP-Board through the USB OTG port, or only through the 5VDC Barrel connector?

http://www.bitscope.com/product/blade/

Intro from Arkansas, USA

Jeremy Potocki — Fri, 22 Jul 2016 22:41:10 +0000

Greetings from Arkansas,

I am Jeremy Potocki a man that has been building and repairing computers, and other electronics for over two decades. I am also a Artist, and I am a Part-Time IT guy for a small private school. I have waiting for something better than the "Intel on a stick" computers for quite some time. There nice and all, but you can not install any other OS other than Win 10, no way to put in better heatsink nor fan, limited USB Ports, and they have a weaker Atom CPU. I am planing in the next few months to order several of these boards to see just what I can do with these boards like:
using old OS like Windows 7 (and older), ReactOS, DOS (even FreeDOS,)etc.
Putting in larger heatsinks and fans (maybe try overclocking)
Emulator and Classic Game testing.
I have two project s right now that this board may just be perfect for. For a 2 years now I have been trying to get a system up and running that will allow people that are bed ridden, and or in a nursing home to be able to communicate with loved ones (or anyone else ,) watch live streams of there church (or other religious) services, and stay entertained to lift there spirits up. Yet keep the system super simple to understand and use.

The other project involves our states (Arkansas) mandate for programing class in the schools, but that one is starting a non-profit organization, but if that is all I can say for now.
so for now I will be looking or asking a ton of questions before I get the boards, and after I get some boards I will be posting a lot of the results here.

well thanks for reading.

up from france

gat — Sun, 24 Jul 2016 01:12:24 +0000

salut un topique frenchie ?

Intro from Mikronauts

William Henning — Wed, 20 Jul 2016 00:15:11 +0000

Hi,

I am very interested in the UP board for:

- as a small deployable X86 platform
- robotics
- another platform to support with Mikronauts products

If you are interested about knowing more about me and Mikronauts, please see

http://www.mikronauts.com/

Hopefully I'll receive my UP-board order soon (ordered March 23, 2016)

Intro From India

Sandeep Rao — Thu, 14 Jul 2016 20:03:41 +0000

Placed order for UP board today.

Working on a personal project based on Java. Currently runs on ARM boards such as ODROID C2 and XU4, received Pine64 today. Two applications - One is data collector (from networking switches and routers) and the other is a gateway which does basic aggregation of data posted by collector to central portal.

Waiting for delivery of the board - Need to check out the performance.

Intro from UK

Andy Nicholson — Thu, 07 Jul 2016 18:42:57 +0000

Hey everyone.

I'm from the UK, and before you say, I consider myself 100% European

Anyway, I don't have an Up yet, but hope to be ordering one very soon. I've used C# .NET Python, a little C/C++. I'm not Linux minded at all, it's not that I don't think it's good, but I have been a Microsoft boy from my small days and all the way through my professional life - I've never HAD to use it. I want to explore the possibilities the mighty Atom CPU can provide for a full Windows OS images and I'd like to share my work with the community, but I'm not sure that Microsoft would be happy for me to do that, will have to investigate further.

Looking forward to the journey

Wiki requires login to read

duald flipflop — Wed, 06 Jul 2016 11:19:15 +0000

That's not very welcoming to someone who's just looking for information. Also, no search engine bots are going to be able to index, which would help with traffic to the site and potentially sell more units.

I would reconsider censoring the documentation.

UP as download machine

Daniel — Tue, 21 Jun 2016 12:32:08 +0000

Hi I am from the Netherlands and received my UP-Board a week ago.
Since long I was looking for a nice solution to decrease the load average on my Synology NAS (> 1).
Now thanks to the UP board that has been solved.
It runs on Ubuntu (normal desktop version) and hosts Couchpotato, Sickrage and SABnzbd+.
The files are downloaded, unpacked and moved to the NAS.
The board it self handles everything with ease. The board itself lives in the utility closet.

Intro from USA, East Coast

Chris Bobko — Thu, 14 Apr 2016 13:49:29 +0000

Hello all!

Glad to finally see the community open! Just got notification that my order will be on it's way in May. Just wanted to drop by and share my plans for the UP board, and to document my projects/experimentation once my boards arrive and I'm able to dig in a bit further.
Initial experiments:
-Slipstreamed minimal installs of Windows XP, Windows 7, which boot directly to a specific program (like a console or a touch program)
-Getting QB64 (http://www.qb64.net/) working with the GPIO pins and an LCD screen (why? for that retro/vintage look!)
-Boot screen customization? Not sure what the bios looks like, but can I change the boot screen for embedded applications?
-Using the UP as the brain for various movie props and art projects which will be further detailed!

Looking forward to it everyone.

Intro From Italy

Marco Dal Pino — Wed, 13 Apr 2016 09:52:21 +0000

Hello, I'm Marco from Italy and I'm a consultant in Embedded and mobile environment from many years.
I work as Sw Eng and team manager in several project for 3rd party projects in the embedded, automation and mobile sector.
I'm still waiting to receive my UP board from Kickstarter campaign, hope to try it very soon.
I actually enjoy working on WIndows10 IoT Core platform and hope to do it also on UP.

Intro from US PNW

Shane — Thu, 14 Jan 2016 20:24:30 +0000

Greetings fellow UP Innovators...

I hail from the Pacific Northwest US (PNW) and am excited to begin using my reward as a replacement for my 3D printers remote host controller. My hope is to be able to port some existing software used on an RPi2, as well as to extend it with some remote model editing/support/slicing web tools.

I am a long time Linux/Uni* user/admin/developer and expect to have some fun with this new platform and OS as well.

Looking forward to my UP board arriving (departed Amsterdam today)

Cheers,

Shane...

Intro from Munich

Patrick Mulder — Fri, 15 Jan 2016 12:09:37 +0000

Hi!

I've received the UP Board this week, and just plugged it in.
I have a background in web development and microcontrollers (Arduino and STM32). In the past I worked a bit with Unix servers in context of web projects. Currently, I am writing a book about Node.js for Embedded Systems see http://embeddednodejs.com . Also, I run a meetup on Embedded Systems, see http://munich-arduino.de. So, if anyone visits Munich and wants to get in touch that would be great.

The UPBoard looks nice for Multimedia projects and for running the latest Node.js versions (e.g. with nvm ).

Now, I am going to play a bit more with the board!

Cheers,

Patrick

PS Oh, and I work for Intel in a lab for component verification.