UP Xtreme i11 Linux — upcommunity

Up Xtreme i11 i225 Ubuntu 22.04

graffiti — Sat, 25 Mar 2023 12:40:32 +0000

Hello UP Boarders,
The UP Xtreme i11 pages show a note that:
"Please note that the latest NVM for i225 IT Ethernet controller is not working in Ubuntu Linux."
with a link to a 1.5yr old Ubuntu bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1945178

Does this apply to the integrated i225 ethernet controller?

Is this still an issue with Ubuntu 22.04?

Thanks, Graf.

UP XTREME I11 0001 Fan control is broken

fredoh — Wed, 21 Sep 2022 18:55:25 +0000

I have both 0000 and 0001. We had noisy issue on 0000 and got familiar with Fan Control. It works fine.
https://downloads.up-community.org/download/upx-tgl01-fan-control-linux/

However I purchased more TGL Up Xtreme i11 0001, didn't think much different from 0000. Fan Control seems broken. I have two 0001, I never have FAN ON. When I connect the fan pins to my different motherboard, fan is running fine. at least FAN is okay. problem is mini 4 pin.

Without FAN ON, sensor reads +50 degree in idle time.

When I measured voltage on 4 pins, from the left to the right(pin1 to pin4)
0V 0V 4.6V 2.3V

It is much different voltage read from working pin in different board.

I ran the command before the measurement
//# bus is 0, it looks most of case it is 0
sudo i2cset -y $bus 0x2e 0x40 0xff

From the BIOS setting, it has 255 from Fan control.

BIOS version for HW 0001, only one available, is R1.0.

Can you check and help?

Has anyone got PXE boot to work?

mbrainerd — Tue, 23 Aug 2022 20:09:53 +0000

I went into UEFI to set the IPv4 to a static address, but I could not find where to set the HOST IP or the file name to boot. I'm more experienced with u-boot and ARM.

Enable Iris Xe Gpu

dominicchin — Fri, 11 Feb 2022 01:22:34 +0000

(1) I followed the instructions from the wiki https://github.com/up-board/up-community/wiki/Ubuntu_20.04 to install Ubuntu onto my Up Extreme i11 board.

(2) According to this document https://dgpu-docs.intel.com/devices/iris-xe-max-graphics/index.html, it appears that I need to replace the default Ubuntu 20.04.1 default kernel with the linux-oem-20.04 kernel to get the kernel driver to the Iris gpu, i.e.

$ sudo apt update && sudo apt install linux-oem-20.04

(3) But the Intel UP Extreme board is using a custom kernel: linux-generic-hwe-18.04-5.4-upboard. Should I be replacing the custom kernel with the linux-oem-20.04 kernel?

thanks

How to check if fibocom 5G GPS is working

kekp — Thu, 27 Jan 2022 12:01:39 +0000

Hi,

Is there a reference guide for the AT commands available for the FM150 5G module?

UART on Up-Xtreme-i11 (Linux)

tallu — Wed, 09 Feb 2022 09:17:09 +0000

I'm testing UART on Up-Xtreme-i11 with Embedded Linux built with Buildroot but I doesn't work.
Is there a reference Linux image/BSP?

Regards,
Tal