UP Squared Pro Hardware Specification — upcommunity

Power/reset cable for UP2 Professional

VMSEAGLE — Tue, 03 Oct 2023 01:00:34 +0000

Does AAEON sell a power/reset switch cable or kit for the UP2 Professional ? Something that one connect to front panel connector CN34 and bring the power and reset functions to a surface mountable switch.

Thanks.

Downloads for UP Squared Pro

Pratik_Kushwaha — Thu, 01 Apr 2021 07:54:02 +0000

Please find the download files for UP Squared Pro here,

https://downloads.up-community.org/ > Under 'UP Squared Pro'

Power the UP4000 via 5v

stevenjameson — Fri, 12 Aug 2022 14:49:57 +0000

Is it possible to Power the UP4000 via 5V rail on the 40 pin hat connector?

Mounting holes positions for Edge system

rreignier — Fri, 25 Feb 2022 18:09:35 +0000

It is nice to provide a 2D drawing of the Up Squared Pro Edge system but without the bottom side with positions and dimensions of the mounting holes, it is almost useless.

Could you add these measurements to the 2D drawing available?

Thanks

UP2 Professional pin specifications for fan power and power/reset connectors

VMSEAGLE — Sun, 10 Apr 2022 23:52:34 +0000

Can you provide the specifications (i.e., pin spacing and pitch) for the Fan Power (CN17) and Power Button (CN34) connectors on the UP2 Squared Professional board ? I need to find the mating connectors for custom cables that I will be making.

Thanks.

M.2 2242 support

manubo — Fri, 15 Apr 2022 13:05:21 +0000

Hello,

We are considering the up2 pro as the base board for our devkits (volume ~100/year)
We need to insert in it a M.2 board with format 2242-D3-B-M

I see you have a slot 2280 over another 2230 slot. I wonder if the 2280 slot aligns so that the screw of the 2230 can be used with a 42mm long board.

Thanks for your reply.

UP Squared Pro Voltage

tpwatson — Wed, 16 Mar 2022 18:28:14 +0000

The datasheet quotes a power requirement of "12~ 24V DC-IN". I looked in the manual for more information, and there is a jumper labeled 12V and another labeled 24V. Do I need to set the 24V jumper to safely give the board 24V? What is the minimum and maximum voltage in 24V mode if so? How could I give it an intermediate voltage, like 16V?

HAT Connector programming

VMSEAGLE — Wed, 29 Sep 2021 05:17:53 +0000

Are the register addresses, layouts and bit functions to access the HAT connector available ? I need to drive signals on the HAT pins by accessing the hardware directly. I am not using LINUX or Windows.

Does the Up square pro has power isolation?

kumar — Thu, 27 Jan 2022 10:57:00 +0000

I would like to use UP Square Pro for industrial application(24x7).
I would like to know the power section isolated ( Galvanically ) or not.

Request for PCIE and ACPI table information

VMSEAGLE — Wed, 22 Dec 2021 06:20:28 +0000

Is there a layout for the communications port and GPIO registers in PCIe space available. Also, is a specification available for your vendor-specific ACPI tables (and are the COMM and GPIO addresses in them ?).

I am developing drivers for a proprietary non-Windows non-LINUX operating system that will run on the UP2 system. I see that the COMM ports are connected through a FINTEK LPC. I have the I/O space information for the FINTEK but the PCIE side of the connection presents a PCIE configuration table and gets mapped and addressed during the configuration process. What base address register does the PCIE side use ? Are the UART registers available at PCIE MMIO offsets ? Likewise for the GPIO.

I have written a driver for a M.2 board that uses the ASIX AS99100 chip. In addition to providing legacy I/O space access, the PCIE side of the AS991000 provides MMIO access through base address register 1. Using MMIO I can get to the classic 16550 registers as well as enhanced function registers.

Is similar MMIO access through the FINTEK and GPIO connections available ? What are the address offsets in MMIO space ?

SATA drive activity

VMSEAGLE — Mon, 26 Jul 2021 02:09:34 +0000

Is there a lead or signal that can be brought out, possibly to an LED, that will show SATA disk activity ?

Mounting the board.....

xsherlock — Tue, 07 Sep 2021 10:32:55 +0000

Can someone explain me what is the logic behind the decision this board has only 2 holes for a mounting it the target enclosure? It realy needs 4 mounting holes !

Anyway not just to complain. Here is my lab desk stand for it so you can attach it to something while tinkering with it.

This is the vesion that has place for the optional 2 usb ports below it and 4 SMA adapters for the 5G pigtails.

Let me know if someone wants it as I cant attach it to the post in the STL format.

Need COM1 and COM2 implementation details

VMSEAGLE — Tue, 27 Jul 2021 03:38:06 +0000

According to the UP Squared Professional block diagram for the E3950, serial ports COM1 and COM2 are "behind" an F81216 LPC to UART chip. The F81216 data sheet shows the F81216 as a single LPC to UART chip.

Are the COM1 and COM2 ports part of the F81216 or are they really behind the F81216 and separate F81438G chip implementations ? Do the COM1 and COM2 ports look to be direct PCIe devices (that is, the F81216 is transparent) or does the F81216 look like some type of bridge or adapter ? If so, what does the bridge/adapter look like (ISA, XBUS, etc.) ? Thanks.

COM3 and COM4 ?

VMSEAGLE — Tue, 27 Jul 2021 03:52:53 +0000

Searches for the FINTEK F81216 data sheet all lead to a data sheet for the FINTEK F81216 all lead to the F81216D/DG which is listed as a LPC to 4 UART implementation. Are the additional COM ports available ?

Need register and address space information

VMSEAGLE — Mon, 26 Jul 2021 02:19:33 +0000

Can I get documentation on register layout and the hardware address space ? I'm looking for things like the addresses that PCIe, ISA and XBUS registers show up at, interrupt vectors, vendor IDs used, chips used to implement things like the serial ports, I/O bridges, etc. Specifically looking at things like serial ports now but expect to be looking at manipulating lines on the HAT connector very soon.

Thanks.

Additional USB2 ports

xsherlock — Fri, 23 Jul 2021 13:02:47 +0000

Do I understand that corretcly that that CN16 connector on the board has additional 2 USB2.0 ports that I can use?

Is that expansion cable right for it? Is that connector standard ammong all boards?

https://www.tme.eu/en/details/ep-cbusb10pfl01/accessories-for-embedded-systems/aaeon/

Link error in the wiki specification

xsherlock — Fri, 23 Jul 2021 12:49:34 +0000

https://github.com/up-board/up-community/wiki/Hardware_Specification_UPS_Pro

On that page UPS pro specification there is a link for connector specifiacation that I'm quite sure is invalid as it linkt to the following page with the download of the UPS non Pro pdf file!!! please fix it it is coonfusing.

https://downloads.up-community.org/download/up-squared-connector-pin-guide-up-apl01/

Specification for the Power Connector

apieper — Mon, 05 Jul 2021 08:11:01 +0000

Hi,

When I bought the Up² Pro, I didn't notice that the power connection was different from previous Up boards. I checked the Wiki and the 2D / 3D drawings from the download area, but all I can do is to take my ruler and measure the dimensions by hand. Can you please give me the dimension, sketches or rather part number and manufacturer of the DC power jack? I need to buy the correct connector and want to use the screw thread around the hole to lock it.

Many Thanks.

Headers - Power/Reset

salty_fish — Fri, 02 Jul 2021 17:55:38 +0000

Will information pertaining to the headers be shared at some point? Specifically the power/reset header most interests our project. I am hoping to tie the OpenUPS' mobo pulse power to this header to turn the system off.