UP Squared Pro 7000 Hardware Specification — upcommunity

Quectel EM05 too short for UP2 PRO 7000 PCB standoff

jminhas — Fri, 24 Oct 2025 09:01:26 +0000

Seeking any advice on how to solve this (physical hardware) issue.

We have just received an Upsquared Pro 7000 system and ordered an EM05 M.2 3042 LTE module kit to go with it (both from UP Shop).

When we installed the EM05 module into the system we find that the PCB standoff on which to screw down the module is too far to reach. I've attached a picture here:

Wondering if this issue is recognised and if there's a readily-available fix before we attempt a custom DIY job.

Can't able to attach 5G Module Telit FN990A40/FN980

Navodayavarmak — Mon, 08 Sep 2025 10:47:59 +0000

Hello Team,
I am tring to insert Telit FN990A40 module to modem slot, but its not fitting and size of the slot on board is comparitively little small.
Could not able to move any further.. Is there any list of modem that only support/fits to our board? if yes please forward the details.
And how can we able to insert the sim if the above problem resolved..
I have attached the picture of our modem
Please provide the resolution as soon as possible, hope team understands..

Thanks,
Navodaya.

GPIO naming discrepancy in documentation

Demboys — Fri, 15 Aug 2025 18:10:59 +0000

In the document "UP Squared Pro 7000 (UPN-ADLN01) Manual 2nd Ed.pdf" taken from up-shop download section, GPIOs naming for HAT(CN17) correspond with the BIOS.

In the document "UP40pin_BoardsMapping.xlsx" taken from the Wiki, GPIOs have a different numerotation and some "Alt Function Type" also diverge. When we try to use GPIOs, they seem to match with this naming scheme. For exemple, to activate the PIN26 which would be GPIO23 in the Manual and BIOS, we have to activate GPIO7 which match with the Excel file.

This issue causes some headaches with the use of the Alt functions on a custom daughter board. How can we know that we use the right pins for these functions without conflicts when nothing matches with documentation?

Part number for mating connector for CN26

scotthew — Thu, 23 Jan 2025 15:50:46 +0000

Anybody have this part number or for the board mount connector?

Object detection Inference Speed Benchmarking on UP Squared Pro 7000

VinodGutta — Sun, 06 Oct 2024 12:59:59 +0000

Hey Community,
Has anyone tested yolo or other object detection inferencing on Up Squared Pro 7000 GPUs (24EUs/32EUs)? For my application, I want to inference yolo-v8m fp16 model at ~30fps. Any insights on Up Squared Pro 7000 inferencing speed and AI TOPS would be a great help.

USB 2.0/UART 1x10P Wafer (CN14) - Specification and ordering cable

vassefe — Sun, 21 Jul 2024 13:54:32 +0000

Could you please let me know where I can find connectors for the CN14 connector of the UP Squared Pro 7000, described as "USB 2.0/UART 1x10P Wafer (CN14)" in the User Manual?
Ideally, I'd like a converter cable from this CN14 connector to a normal USB Mini plug.

Thank you.
vassefe

Amount of SPI

vissermatthijs — Fri, 03 May 2024 11:33:55 +0000

Hi,

We are transitioning from the PI to the up squared pro 7000. On the datasheet I don't see second SPIinterface, is this correct? See PI pinout in picture with second SPI interface.

thanks!

TCC-specific BIOS for x7425e

e1guapo — Tue, 12 Dec 2023 00:56:48 +0000

I have some experiences on x6000 series CPU with TCC-specific BIOS. But the BIOS for x7425e version of Up Squared Pro 7000 apparently is not TCC-specific. I can’t find such firmware on Up’s download page. Where can I get it?

Fan connector J1

john_ekle — Fri, 21 Jul 2023 00:55:17 +0000

What type or model number for the fan pwm j1 connector is? I would like to use this connector to cool 5G modem with a 12v 0.48w 0.04amp fan.

What is the max amperage this j1 port can deliver?

up squared pro 7000 case should come with 4 5G antenna knockout holes, almost all 5G modems require 4 antennas.

Front Panel Plug Specification (UP Squared Pro 7000)

C_x_s — Wed, 12 Jul 2023 06:40:02 +0000

Hi,

I am looking for a source to get the full specification for the "Front Panel 1x6P Wafer (CN21)" connector on the UP Squared Pro 7000.
Would be great to get a link to a sourcing partner (e.g. mouser).

Thank you

Upsquared Pro 7000 M.2 Key B socket

emyioo — Wed, 21 Jun 2023 09:07:24 +0000

Hi all,

I was considering getting an Upsquared pro 7000 board to use it as a gateway together with a 5G modem.
At first glance, the board looks perfect for this purpose, as it has an M.2 Key B port, nano-sim slot and two 2.5G Ethernet ports.

But after looking more closely, I saw in the specs:
1 x M.2 3052 B Key (USB3.2 Gen 2 only) with Nano SIM slot

Some 5G modems, including one that I already have, only support PCIe communication.
If that's true, that the M.2 B Key slot only supports USB, that's unfortunate not to be able to use the PCIe only modems.

Bests