Moving Onboard OS to mSATA III

MarkyMark — Tue, 24 Oct 2023 07:07:17 +0000

Hi,

I've just bought mSATA 256GB SATA III so that I can move the onboard OS on my Up Squared and get more space.

Simple question is how can I go about doing this?

Thanks

Mark

Question: Up squared i12 UART is not working

khkim — Fri, 03 Jan 2025 09:07:22 +0000

I am experiencing an issue with UART communication.
Although the devices are initiated correctly, the echo test using a loopback connection does not work.

[ System Info ]
Model: UP Squared i12, Intel Core i7-1260P
OS: Ubuntu 22.04.5 LTS
Kernel: 6.8.0-50-generic
Driver: pinctrl-upboard (v1.1.6)

[Observations]
When executing "dmesg | grep tty*", ttyS4 and ttyS5 appear to be activated.
[2.988076] dw-apb-uart.6: ttyS4 at MMIO 0x4017006000 (irq = 16, base_baud = 6250000) is a 16550A
[3.015300] dw-apb-uart.7: ttyS5 at MMIO 0x4017007000 (irq = 17, base_baud = 6250000) is a 16550A

[Run Test]
1. To perform the UART Loopback Test, pin8 and pin10 were connected with a jumper.
2. Open terminal “screen /dev/ttyS5 115200”.
3. Enter text into the terminal to perform an echo test.

[ Result ]
Characters entered in the terminal are not echoed.

[Question]
I also tested this setup under Ubuntu 20.04 with kernel versions 5.15.x and 5.4.x, but the issue persists.
Could you help identify the issue or suggest further debugging steps?

Thank you!!

UP Squared i12 Linux — upcommunity

Moving Onboard OS to mSATA III

Question: Up squared i12 UART is not working