UP Squared 6000 Hardware Specification — upcommunity

UP Squared 6000 Edge with X6425RE processor, possible to enable (1.9GHz -> 3GHz) Intel Burst?

GvY85 — Tue, 17 Jan 2023 08:18:54 +0000

Since I want an Edge system with 64GB EMMC and 8GB RAM the only option seems to be the Embedded X6425RE processor (UPN-EDGE-EHLX4RE-A10-0864).
I see this processor seems to not have Burst enabled by default and runs on a fixed 1.9GHz?
Is it possible to enable Burst from the BIOS or do I need to buy the J6426 version with only 32GB EMMC / 4 GB RAM for 3GHz (burst) clocks??

Faulty Board. How to fix?

rvup — Thu, 03 Nov 2022 03:27:59 +0000

We bought a few UP2 6000 boards a few months ago.
Now one of them does not boot up - no output on HDMI or DP monitor is seen, but the leds on the board are lit.
How to troubleshoot further or get it repaired under warranty?

Intel Atom® x6425RE Processor: TCC Worth for Audio-PCM-Streamer ?

multiblitz — Tue, 25 Oct 2022 12:46:12 +0000

I want to build Audio-Streamers which over I2S or USB feed external High-End-Digital-Analog-Converters (with external clocks etc).

So, the requirement is to have lowest noise, lowest jitter possibe. Best clocks be it for the TSC/CPU or USB clocking are very important.

The Atom x6425RE brings Intel® Time Coordinated Computing Tools to Ubuntu...

So, I am not sure if this is what I should try in any case as I susoect that the quality of clocks, buffering, lowest jitter etc is helpful even for normal PCM-PLayback

This is not such a great idea as the actually apps like MPD (Music PLayer Daemon) anyhow are not realtime-apps and we dont have a real-time requirement neither.

So, is TCC only for very special realtime-devlopers or will the tuning of the system towards lowest jitter plus maybe some more precise clocks (?) not in any case be very beneficial...?

As there is a significant price premium between a x6425RE and a normal Celeron board...I would be thankful for some guidance.

Up Squared 6000 CAD files?

mgagv — Sun, 10 Apr 2022 21:13:59 +0000

On this page there are no STEP, IGES or other solid 3D files available. However, they are available for other UP board products. Is there a link to the official 3D models for the Up Squared 6000?

Thanks in advance.

Audio wafer cable for UP Squared 6000?

adalessandro — Wed, 27 Jul 2022 20:57:48 +0000

The UP Squared 6000 has a 6-pin audio wafer header. Is there any cable available to expose the audio jacks?

UP Squared 6000 PCIe lanes and connectors

alftel — Thu, 21 Jul 2022 00:18:02 +0000

I am confused a bit User Guide vs Actual implementation - user guide states in one place that M.2 Key M is populated with x2 PCIe lanes while actual slot pinout in the same user guide shows only x1 lane populated. Without schematic my understanding is the following:

1) M.2 Key E - x1 PCIe, x1 USB 2.0
2) M.2 Key B - x1 PCIe, x1 USB 3.0, x1 USB 2.0
3) M.2 Key M - x1 PCIe (or x2 ?)

Can somebody confirm these three point above? Another thing that I really do not get is why designer didn't route at least x1 PCIe lane to this board to board 100pin connector - this will be really cool.

Support for Sierra Wireless EM9190/EM9191 5G card

dmarion — Sat, 25 Jun 2022 09:51:11 +0000

Can anybody confirm that Sierra Wireless EM91xx 5G works on UP Squared 6000?
That card is a bit specific, works in PCIe only mode unless specific pin (PCIE_DIS) is pulled up.
User manual shows that PCIe lane is routed to B-key M.2 but other diagrams show only USB connectivity.

Thanks!

Where to find electrical characteristics for GPIO?

MKoestler — Thu, 16 Jun 2022 11:09:55 +0000

Since the Up Squared 6000 series did away with the MAX 10 FPGA, I am wondering what impact that has on the electrical characteristics of the I/O pins on the HAT40 header.

Is there a document that details the voltage levels and drive strength characteristics of the GPIOs?

The UPN-EHL01 User's Manual only shows the standard Raspberry Pi compatible pinout, but does not go into detail.

Up Squared 6000 Chassis

mgagv — Sun, 10 Apr 2022 22:38:09 +0000

Hi all,

I have created a chassis for the Up Squared 6000 using measurements I took myself of the board along with the PDF drawings on up-board.org. You can find it on GrabCAD. I would appreciate any feedback or comments on the design.
(More pictures in the GrabCAD link).